2015 Ram 1500 Parking Brake Replacement

The 2015 Ram 1500 parking brake replacement is a relatively simple task. First, identify and loosen the two mounting bolts located behind each rear wheel on either side of the vehicle. Once removed, access to the parking brake cable can be gained by removing any additional components that may be blocking it such as trim pieces or insulation.

With these out of the way, you will see where the cable connects to both wheels and can now detach them from their respective connection points using a socket wrench or pliers for leverage. Next, slowly pull out on both ends of the cable until it is completely detached from its original position in order to replace with a new one provided by your local auto parts store. Finally, once installed reconnect everything back in place making sure all bolts are securely tightened and check functionality before driving away!

Replacing the parking brake on your 2015 Ram 1500 is a relatively easy task that can save you time and money at the mechanic. The process involves removing the wheel, disconnecting the cable from its anchor point, replacing it with a new cable and reattaching it to its anchor point before reinstalling the wheel. With just some basic tools and an afternoon of work, you can have your truck’s parking brake working again in no time!

How To Replace Parking Brake Shoes 2009-2017 Ram 1500

Why is My Parking Brake Not Working Ram 1500?

If you own a Ram 1500, there’s a chance that at some point your parking brake may stop working. This can be frustrating and potentially dangerous as it means your truck isn’t secure when parked. Fortunately, there are several potential causes of this issue and ways to fix it.

The most common cause of an unresponsive parking brake is either dirt or rust buildup in the system which prevents the brakes from engaging properly. If this is the case, you’ll need to remove any excess debris from the system using a wire brush or similar tool before lubricating the components with penetrating oil. If this doesn’t solve the problem then it could be due to broken or damaged parts such as worn-out cables, faulty lever arms or seized caliper pins – all of which should be replaced for optimal performance.

Additionally, air in your brake lines could also prevent them from activating correctly so make sure these are bled appropriately if necessary. Finally, check that all bolts are tightened correctly on both sides of your rear wheels as loose ones will prevent sufficient pressure being applied when using your parking brake pedal.

How Hard is It to Replace a Parking Brake?

Replacing a parking brake can be difficult, depending on the make and model of your vehicle. In some vehicles it is relatively easy to replace the parking brake components yourself at home. However, in other cars it may require professional assistance due to complexity and safety concerns.

The procedure for replacing a parking brake varies from car to car and will depend on what you are trying to do with the old parts: Are you just replacing one component or are you installing an entirely new set-up? It also depends on whether or not your vehicle has been modified in any way as this may affect access for certain components. If possible, consult your owner’s manual for information about how to replace a parking brake; however, if that fails then consulting with a qualified automotive technician would be advisable so they can explain exactly what needs doing and offer advice about specific tools required for the job.

How Do You Remove the Parking Brake on a Dodge Ram?

One of the most important steps when removing the parking brake on a Dodge Ram is to make sure that it is in park and that the vehicle is off. Once you have ensured these conditions are met, locate the brake lever near your left thigh while sitting in the driver’s seat. Pull up on this lever to disengage both mechanical and electronic components of the parking brake system.

If necessary, shift into Neutral or Low gear as an added precaution against roll-back. The next step involves locating two spring clips at either side of the vehicle which can be released by pressing inward with a flathead screwdriver or similar tool. Then, use an adjustable wrench to loosen and disconnect one end of each cable from its mounting bracket located behind each rear wheel assembly – be careful not to overtighten these screws!

Finally, remove any remaining hardware from around the caliper assemblies before securing them back onto their original mounting points using new bolts if necessary. You should now have successfully removed your parking brake from your Dodge Ram!

How Do You Fix a Broken Parking Brake?

Fixing a broken parking brake can be done fairly easily, although it does require some mechanical knowledge. First, make sure the vehicle is in park and turn off the engine. Then, check to see if the car’s parking brake lever or foot pedal are stuck down.

If they are not moving freely, you will need to take apart the lever/pedal assembly and remove any dirt or debris that may be causing the issue. Once this is done you may need to lubricate any components with grease before reassembling them. Finally, adjust both sides of the parking brakes equally so that they work together properly and apply an equal amount of pressure when engaged – otherwise your car will pull one way or another when parked on an incline!

With these simple steps completed your parking brake should now be working as good as new!

2015 Ram 1500 Parking Brake Replacement

Credit: www.amazon.com

2014 Ram 1500 Parking Brake Replacement

Replacing the parking brake on a 2014 Ram 1500 is an easy job that most car owners can do themselves with some basic tools and knowledge. The first step is to remove the rear wheels, calipers, rotors and park brake cables before unbolting the old parking brake assembly from its mounting bracket. After that, it’s just a matter of installing the new part in reverse order and cleaning up any spilled brake fluid or grease.

With proper care and attention to detail, you’ll have your truck back on the road in no time!

2016 Ram 1500 Parking Brake Replacement

Replacing the parking brake on a 2016 Ram 1500 is a straightforward process that can be completed in roughly 30 minutes. It involves removing the wheels, disconnecting the old parking brake cables, and replacing them with new ones. Additionally, it may be necessary to lubricate certain components of the brake system during reassembly.

With just basic tools and car repair knowledge, anyone can easily replace their own parking brake on this model year of Ram truck.

2015 Ram 1500 Parking Brake Adjustment

If you own a 2015 Ram 1500, it’s important to make sure that your parking brake is properly adjusted. A correctly adjusted parking brake ensures that your vehicle will remain stationary and secure when parked. To adjust the parking brake on a 2015 Ram 1500, start by raising the vehicle off of the ground with a jack or car lift and then locate the adjusting nut on one side of the rear brakes.

Next, use an open end wrench to turn each adjustment nut until you have achieved proper tension on both sides of the rear brakes. Finally, apply pressure to both sides of the pedal and make any necessary final adjustments as needed before lowering your vehicle back onto its wheels.


The 2015 Ram 1500 Parking Brake Replacement is a straightforward job that can be achieved with basic hand tools, and the right parts. This blog post was an overview of the process involved in replacing the parking brake on this model truck, as well as some tips to help ensure a successful repair. With these steps in mind, you should now have all the information you need to successfully replace your Ram’s parking brake.


  • Zayn

    John Zayn Smith is a renowned truck enthusiast, automotive industry expert, and author. Beginning his career as a mechanic, Zayn's curiosity led him to explore all facets of the trucking world, sharing his insights through in-depth articles on TruckGuider.com. His knowledge spans truck mechanics, trends, and aftermarket modifications, making him a trusted resource for both professionals and hobbyists. Outside writing and mechanics, Zayn enjoys off-roading, truck shows, and family time. Follow his work for the latest in truck-related news and tips.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *