2019 Ram 1500 Wheel Torque Specs

The 2019 Ram 1500 wheel torque specs depend on the size and type of factory-installed wheels. For the 18” steel wheels, use a torque of 89 lb.-ft.

, while for 20” aluminum alloy wheels, use 115 lb.-ft. For 22” aluminum alloy wheels, you should use a torque of 132 lb.

-ft. The lug nuts should be tightened in a crisscross pattern to ensure even pressure is applied and that all four lugs are secure. Torque each lug nut in two steps – first tighten it by hand until snug and then apply an additional ¼ turn with an impact wrench or ratchet set to achieve the proper amount of torque for your specific wheel type and size.

The 2019 Ram 1500 is equipped with some of the most powerful wheels on the market, and the wheel torque specs are designed to ensure your truck is ready for any job. With a maximum wheel torque of 925 lb-ft, you can trust that your Ram will have no trouble tackling tough terrain or heavy loads. The wheel torque specs also make it easy to find compatible aftermarket parts so you can further customize your ride.

Whether you’re looking for an upgrade in style or performance, these specifications will provide everything you need to get the most out of your truck.

Car wheels torque specs for most makes and models

What is the Wheel Torque for a 2019 Ram 1500?

The wheel torque for a 2019 Ram 1500 is 930 lb-ft. This considerable amount of torque provides reliable and powerful performance, making it perfect for hauling heavy loads or towing large trailers. The torque is achieved through the combination of its 5.7 liter V8 Hemi engine with eTorque mild hybrid technology, delivering maximum power at low rpm levels and providing plenty of low-end grunt in any situation.

The engine’s variable valve timing also allows for consistent power throughout the entire rpm band range, allowing you to confidently take on whatever roads you may encounter without sacrificing performance or efficiency. With this impressive wheel torque output, your 2019 Ram 1500 will be able to tackle tough jobs with ease while still offering comfortable daily driving capabilities when not taking on extreme applications such as offroading or heavy work duties.

How Much Torque for Axle Nut on 2019 Ram 1500 Classic?

The 2019 Ram 1500 Classic comes equipped with a 5.7-liter V8 engine, which requires an axle nut torque of 140 ft.-lbs. for proper installation and secure fastening. It is important to use the right amount of torque when tightening any nut or bolt on a vehicle, as too little can lead to premature wear or even failure, while too much can damage the threads in the part being secured.

For this reason it’s best to use a quality torque wrench whenever possible and always make sure you are following manufacturer’s recommendations for each specific application. In addition, having all four wheels properly aligned after any service that includes loosening and re-tightening lug nuts will help ensure maximum tire life and optimum performance from your truck’s suspension system over time.

What Torque Should Truck Wheel Nuts Be?

When it comes to setting the torque on truck wheel nuts, there are several factors that must be taken into consideration. The type and size of the nut and bolt being used, as well as the weight of the vehicle itself, all play an important role in determining how much torque should be applied. Generally speaking, light-duty vehicles such as pickups may require between 50-70 foot-pounds (ft.-lbs.) for each wheel nut; medium-duty trucks may require up to 90 ft.-lbs.

, while heavy-duty vehicles can go even higher at 115 ft.-lbs. Additionally, some manufacturers specify a specific amount of torque for their products—as always it’s best to check with them first before taking any action. When using a torque wrench or other tool to tighten wheel lug nuts or bolts, make sure you follow proper safety procedures and use only recommended tools and parts from trusted sources.

It’s also important that you don’t overdo it when tightening your wheel nuts – this could cause damage to your rims or tires which could ultimately lead to costly repairs down the road. To ensure proper installation and maximum safety, always refer back to your owner’s manual for exact instructions regarding what torque should truck wheel nuts be set at for your specific make/model/year vehicle!

What is the Torque on the Axle Nut of a Dodge Ram 1500?

The torque on the axle nut of a Dodge Ram 1500 is an incredibly important component of the vehicle’s overall performance. It determines how much load your vehicle can handle and ensures that your truck stays stable while driving. The torque for the axle nut of a Dodge Ram 1500 is typically rated between 150 ft-lbs to 180 ft-lbs, depending on the year and model you have.

To ensure optimal performance, it’s important to check the manufacturer’s specifications before tightening or loosening any bolts associated with your wheel axle assembly. Additionally, make sure that all fasteners are properly lubricated prior to installation or removal as this will help reduce friction and prevent damage from occurring due to stress or strain caused by improper torquing. Furthermore, always use a calibrated torque wrench when checking and adjusting wheel nuts in order for accurate readings – using anything other than a calibrated wrench could lead to inaccurate measurements which could potentially cause serious issues if left unchecked!

Credit: tighttorque.com

2019 Ram 2500 Lug Nut Torque

The 2019 Ram 2500 lug nut torque is 140 lb-ft. This value should be strictly adhered to in order to ensure the safety of your vehicle and its passengers. It is important to use a torque wrench when tightening the lug nuts, as this will help you achieve the correct amount of torque for each individual lug nut.

Additionally, it’s recommended that you rotate your tires every 5,000 miles or so in order to maintain proper tire balance and even wear on all four wheels.

2019 Ram Promaster Wheel Torque Specs

The 2019 Ram ProMaster comes with a torque spec of 250 lb-ft when equipped with the 3.6L V6 engine and 280 lb-ft when paired with the 3.0L EcoDiesel engine. It also features 16″ steel wheels, an optional 17″ aluminum wheel upgrade, and a maximum payload capacity of 4,430 pounds. All in all, these robust specs make the ProMaster an excellent choice for commercial applications that require heavy duty carrying capabilities.

2019 Ram 1500 Lug Nut Size

The 2019 Ram 1500 uses a standard lug nut size of 1/2”-20 for all wheel and tire combinations. The stock wheels require the use of conical 60 degree seat lug nuts, which can be purchased from any auto parts store. It is important to ensure that you are using the correct size when changing or replacing your wheels and tires, as incorrect sizes may not fit properly and could cause damage to your vehicle.

Conclusion

In conclusion, the 2019 Ram 1500 is a powerful and dependable pickup truck with impressive wheel torque specs. It offers great performance capabilities, making it a popular choice among truck owners. As you can see, the torque spec for each wheel type varies depending on your driving needs and preferences.

With its wide range of options to choose from, you’re sure to find one that perfectly suits your needs.