The oil filter on a 6.7 Cummins is located on the driver’s side of the engine, just below the fuel filter housing. It is mounted horizontally and requires either a 27mm or 29mm socket to remove it. The best way to access it without removing any components from the engine bay is by reaching in under the truck from underneath.

This will allow you to get your arms around the oil filter housing and unscrew it with ease. When reinstalling, be sure that you apply fresh engine oil to both sides of new gasket before tightening it down onto the adapter plate in order for proper seal and protection against leakage.

The 6.7 Cummins oil filter is located in an accessible location on the passenger side firewall of your vehicle. The oil filter should be changed every 3,000 miles to maintain proper engine performance and extend the life of your engine. To change it, you’ll need a socket wrench and an appropriate size socket for the oil filter cap nut.

It’s important to use only high-quality filters that are designed specifically for this type of engine when replacing the old one as they will help protect against dirt or debris entering into the system which could cause serious damage or even require costly repairs down the line.

Oil Change On A 6.7 Cummins Diesel!

Where is the Oil Filter Located on a 6.7 Cummins?

The oil filter on a 6.7 Cummins is located on the left side of the engine, near the front of the engine bay. It is mounted to an aluminum adapter plate and held in place with two bolts. The oil filter housing contains two filters – one for fuel and one for oil – which are connected by hoses that run from each filter to their respective tanks or containers.

The fuel filter typically has a larger diameter than the oil one, so it’s easier to spot when you’re looking for it under your hood. To access either of these filters, simply remove the two bolts holding them in place using a socket wrench or ratchet set. Once done, you can easily lift out both filters and replace them with fresh ones as needed.

How Many Oil Filters Does a 6.7 Cummins Have?

The 6.7 Cummins engine is a diesel power plant found in many light and medium-duty pickup trucks, as well as certain commercial vehicles. It is highly regarded for its robustness and reliability, making it an ideal choice for those who want to get the most out of their engines. In terms of oil filters, the 6.7 Cummins has two: one on the driver’s side and one on the passenger’s side.

The primary filter is located on the driver’s side while the secondary filter sits slightly further back near the firewall on the passenger’s side. Both these filters should be changed regularly to ensure optimal performance from your engine and prevent any build up of debris or particles that could potentially affect its longevity or efficiency over time.

Where is the Oil Filter Located on a Ram 2500?

The oil filter on a Ram 2500 is located underneath the vehicle, directly in front of the transmission. It’s mounted to the side of the engine block and can be accessed from underneath by removing several bolts that hold it in place. You may need to use a socket wrench or other tools to get access, depending on your model year.

Once you have removed the mounting bolts and disconnected any hoses connected to it, you should then be able to remove it completely from its mounting location. If there is an old O-ring inside the filter housing, make sure you replace this with a new one before reinstalling everything. You’ll also want to check for any signs of damage or wear before putting everything back together as well.

Where is the Oil Filter on a 2016 Dodge Cummins?

The oil filter on a 2016 Dodge Cummins is located underneath the hood in front of the engine, near the firewall. It can be identified by its cylindrical shape and black plastic housing. To access it, you need to first raise the hood and locate the oil pan.

Once you have found it, look along the side near where it meets the firewall for an additional circular component that has a metal cap on top with a hose running out of it; this is your oil filter. Before attempting to change or remove any parts under your hood, make sure to properly secure your vehicle and disconnect any power sources so as not to cause harm or damage during maintenance.

6.7 Cummins Oil Filter Location

Credit: www.dieselhub.com

6.7 Cummins Oil Capacity

The 6.7 Cummins diesel engine has a recommended oil capacity of 15 quarts with filter changes. The capacity may vary depending on the type of oil used and the vehicle application, so it is important to check your owner’s manual for specific requirements. It is also recommended that you use genuine Dodge/Ram OEM parts when replacing filters or performing other maintenance tasks to ensure optimal performance from your engine.

6.7 Cummins Oil Change Interval

The recommended oil change interval for a 6.7 Cummins engine is 10,000 miles (16,093 km) or 12 months, whichever comes first. However, it’s important to check your owner’s manual and service records to ensure that this is the correct interval for your vehicle. The type of oil you should use depends on the temperature range in which you typically drive; consult with an experienced technician who can help you choose the best option for your driving needs.

6.7 Cummins Oil Filter Relocation Kit

A 6.7 Cummins Oil Filter Relocation Kit is an essential upgrade for any diesel truck owner looking to get the most out of their vehicle. This kit relocates the oil filter, allowing for easier access and providing greater protection against dirt and debris. The relocation kit comes complete with all necessary components such as a new oil filter, hoses, brackets and hardware for easy installation.

With improved performance, extended engine life, reduced maintenance costs and increased fuel efficiency, this kit is sure to be a great investment in your diesel truck’s future!

Conclusion

In conclusion, the 6.7 Cummins Oil Filter is located near the front of the engine on the passenger side. It is easily accessible and should be replaced every 15,000 miles to ensure your engine runs at peak performance. Taking care of your oil filter will help extend the life of your vehicle so make sure you check it regularly for any signs of wear or damage.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *