Lowered 2Nd Gen Dodge Ram 1500 – Proper Guideline
The 2Nd Gen Dodge Ram 1500 was first introduced in 1994 and lasted until 2001. It was a very successful model for Dodge, selling over 1 million units. The Ram 1500 was available in both two-door and four-door models, with the four-door being the most popular.
It came standard with a V8 engine and could be ordered with either a manual or automatic transmission. The Ram 1500 was one of the first trucks to offer an airbag as an option, which quickly became standard equipment.
The 2nd gen Dodge Ram 1500 was lowered by 1.5 inches in 2001. This was done to improve the truck’s aerodynamics and fuel economy. The lower stance also made the Ram 1500 more stable on the highway.
While the change was welcomed by most drivers, some found the new stance to be too low and complained about scraping the ground when going over bumps.
Credit: www.reddit.com
-What are the Benefits of Lowering a 2Nd Gen Dodge Ram 1500
There are many benefits to lowering a 2nd Gen Dodge Ram 1500. Some of these benefits include improved handling, increased traction, better looks, and a more aggressive stance. Let’s take a closer look at each of these benefits in turn.
Improved Handling
One of the biggest benefits of lowering your Dodge Ram 1500 is that it will handle much better than it did before. This is because lowering the center of gravity of your truck makes it less likely to roll over in corners and also improves the suspension geometry.
This results in sharper turn-in and less body roll when cornering. In addition, lowered trucks typically have an increased spring rate which leads to improved suspension damping and a overall smoother ride quality.
Increased Traction
Another big benefit of lowering your Ram 1500 is increased traction. This is especially beneficial if you live in an area with lots of snow or ice as lower trucks tend to have less ground clearance and are therefore less likely to get stuck. In addition, the increased weight on the front wheels from the lowered stance helps transfer weight to the rear wheels during acceleration which results in improved traction and launch characteristics.
Overall, you’ll find that your truck is much easier to drive in all types of weather conditions when it’s lowered.
Statik 2nd gen ram
94-01 Dodge Ram Lowering Kit
A lowering kit for the 94-01 Dodge Ram is a great way to improve the look of your truck and make it perform better. Lowering kits can be found for both 2wd and 4wd trucks. There are many different brands and styles of kits available, so you should take some time to research what’s available before making a purchase.
Most kits will lower your truck by 2-3 inches in the front and 1-2 inches in the rear. This will give your truck a level stance and improved handling. If you do a lot of off-roading, you may want to consider a body lift instead of or in addition to a lowering kit.
This will give you additional ground clearance without affecting your suspension geometry.
When shopping for a lowering kit, be sure to pay attention to quality. Cheaper kits may use inferior materials that could break or wear out over time.
Also, make sure that the kit you choose is compatible with your truck’s year, make, and model – otherwise it won’t fit properly. Installation is usually fairly simple, but it’s always best to consult with a professional if you have any questions or concerns.
2001 Ram 1500 2Wd Lowering Kit
If you own a 2001 Ram 1500 2WD and are looking to lower it, there are a few different lowering kit options available to you. Here is a rundown of what each option offers, so you can decide which one is right for your truck.
Option 1: Eibach Pro-Kit Lowering Springs
The first option is the Eibach Pro-Kit lowering springs. This kit includes 4 springs that will lower your Ram 1500 2WD by 1.5 inches in the front and 1 inch in the rear. The lowered stance not only looks great, but also improves handling and performance.
Option 2: Air Lift Performance Air Suspension Kit
If you want to take your Ram 1500 2WD to the next level, then check out the Air Lift Performance air suspension kit. This complete air suspension system lowers your truck by up to 6 inches at the push of a button.
You can also adjust the ride height on-the-go, so you can always be at your ideal setting – whether you’re hauling a heavy load or just cruising around town. Plus, the air suspension system provides an exceptionally smooth ride quality.
Lowered 2Nd Gen Ram
Lowered 2Nd Gen Ram
If you’re looking to lower your 2nd gen Ram, there are a few things you need to know. First off, which suspension setup do you have?
There are two basic types – torsion bar or coil spring. Torsion bar-equipped trucks will need new lowering shackles in the rear, while coil spring trucks will need drop brackets for the front coils and either hangers or blocks in the rear. You’ll also need to decide how low you want to go.
Two inches is about as low as you can go without running into clearance issues, but some people have gone lower. Just be aware that the lower you go, the harsher your ride will be and the more likely you are to scrape on things.
Once you’ve decided on your suspension setup and how low you want to go, it’s time to start shopping for parts.
A good place to start is with your local auto parts store – they may not have everything you need, but they can at least get you started. You can also check out online retailers or specialty shops that deal exclusively in truck suspension components. Just make sure that whatever parts you buy are compatible with your particular truck model – not all Rams are created equal when it comes to suspension!
Installing your new lowered components is generally not too difficult, but it does require some basic mechanical knowledge and tools. If you’re not comfortable doing it yourself, most auto shops should be able to do it for a reasonable price. Once everything is installed, take it easy at first until you get a feel for how your truck handles at its new ride height.
With a little bit of care (and maybe a few adjustments here and there), lowering your Ram can give it a whole new look and feel – just make sure you know whatyou’re doing before taking the plunge!
2001 Dodge Ram 1500 Lowering Kit
One of the most popular ways to customize a truck is to lower it. This can be done by installing a lowering kit. There are many different types of lowering kits available for the 2001 Dodge Ram 1500, so it is important to do some research to find the best one for your truck.
Lowering kits can range in price from around $200 to over $1000, so it is important to set a budget before starting your search.
The most important thing to consider when choosing a lowering kit is the ride quality. You want a kit that will lower your truck without sacrificing comfort or performance.
Another thing to keep in mind is compatibility with other parts and accessories. Some kits may not work well with certain types of tires or suspension components. It is always best to consult with a professional before making any final decisions.
Installing a lowering kit is generally not a difficult task, but it is always best to have someone who knows what they are doing help you out. Once the kit has been installed, you can enjoy your lowered truck and show it off to all of your friends!
Conclusion
The second generation Dodge Ram 1500 was lowered by an inch in order to improve its aerodynamics. This change also improved the truck’s fuel economy and made it more stable on the highway.
See Also:
