Pt Cruiser Cooling Fan Not Working

The cooling fan is not working because it is not getting power.

If your PT Cruiser’s cooling fan isn’t working, there are a few things you can check before taking it to a mechanic. First, make sure the fan is getting power by checking the fuse. If the fuse is blown, replace it and see if the fan works. If the fan still doesn’t work, the next step is to check the fan relay. The relay is what controls the power to the fan, so if it’s not working, the fan won’t either. Finally, if the relay and fuse are both working, the problem may be with the fan itself. If the fan is damaged, it will need to be replaced.

What Are The Possible Causes Of A PT Cruiser Cooling Fan Not Working?

A PT Cruiser cooling fan not working may be due to a faulty fan motor, a blown fuse, a faulty relay, or a loose or damaged wire.

It’s not uncommon for a PT Cruiser’s cooling fan to stop working. There are a few possible reasons for this.

One possibility is that a fuse has blown. The fuse for the cooling fan is located in the engine bay, so you’ll need to pop the hood and check for a blown fuse.

Another possibility is that the cooling fan itself is defective. This is more likely if the fan has been making strange noises before it stopped working entirely.

If the fuse is fine and the cooling fan is defective, you’ll need to replace it. You can do this yourself if you’re handy with tools, or you can take it to a mechanic.

A third possibility is that there’s an issue with the cooling fan relay. The relay is what controls the power to the fan, so if it’s not working properly, the fan won’t either.

If you suspect the relay is the issue, you can test it with a multimeter. If it’s defective, you’ll need to replace it.

Finally, it’s possible that there’s an issue with the engine coolant temperature sensor. This sensor tells the computer when to turn the fan on, so if it’s not working properly, the fan won’t come on even if the engine is getting hot.

If you suspect the coolant temperature sensor is the issue, you can test it with a multimeter. If it’s defective, you’ll need to replace it.

If your PT Cruiser’s cooling fan has stopped working, don’t panic. There are a few possible reasons for this, and most of them are relatively easy to fix. Start by checking the fuse, and if that’s not the issue, move on to testing the cooling fan itself and the cooling fan relay.

How Can You Troubleshoot A PT Cruiser Cooling Fan Not Working?

If the cooling fan is not working, the first thing to check is the fuse.

1. Check the coolant level and make sure it is topped off. If it is low, add coolant and check the fan again.

2. Inspect the fan blades to see if they are damaged or obstructed in any way.

3. Check the fan motor itself for damage or corrosion.

4. Inspect the wiring harness for the fan, looking for any damaged or frayed wires.

5. Check the cooling fan relay for damage or corrosion.

6. Finally, check the engine computer for any codes that could be related to the fan not working.

If you have gone through all of these steps and the fan still does not work, it may need to be replaced.

How Do You Replace A PT Cruiser Cooling Fan?

To replace a PT Cruiser cooling fan, open the hood and remove the bolts that hold the fan assembly in place.
1. Park your PT Cruiser in a safe, level location and turn off the engine. Let the car cool down for at least 30 minutes before proceeding.

2. Pop the hood and locate the cooling fan. It will be located near the radiator, on the side of the engine.

3. Disconnect the battery before doing any work on the electrical system.

4. Disconnect the cooling fan wiring harness. There will be a plug or connector on the fan itself.

5. Remove the bolts that hold the fan in place. There are usually two or three bolts.

6. Carefully remove the old cooling fan and replace it with the new one.

7. Reattach the wiring harness and battery, and start the engine.

8. Test the fan to make sure it is working properly.

What Are The Symptoms Of A PT Cruiser Cooling Fan Not Working?

The most common symptom of a PT Cruiser cooling fan not working is the engine overheating.
If you own a PT Cruiser, you may eventually have to deal with a cooling fan that is not working. Here are some symptoms to watch out for:

1. The engine temperature gauge rises into the hot zone.

2. The check engine light comes on.

3. You hear a loud noise from under the hood.

4. Smoke starts coming from under the hood.

If you notice any of these symptoms, it’s time to take your PT Cruiser to a mechanic and have the cooling system checked out.

FAQ

Conclusion

If your PT Cruiser’s cooling fan is not working, it is likely due to a problem with the fan itself, the fan relay, or the fan control module. You will need to diagnose the problem to determine which component is at fault.

If you still have questions about why your PT Cruiser’s cooling fan is not working, feel free to leave a comment below.