Toyota 4Runner Wheel Torque Specs

The recommended torque specifications for the Toyota 4Runner are between 65 and 79 lb-ft of torque on the lug nuts. The exact amount depends on the wheel size, which can range from 15 to 17 inches in diameter. It is important to follow these guidelines when tightening your wheels as too much or too little torque can cause damage to both your vehicle and tires.

When replacing a single wheel, it is best practice to re-torque all four wheels after a few hundred miles have been driven. This will ensure that all lug nuts are properly tightened and prevent any potential safety issues resulting from improperly secured wheels.

The Toyota 4Runner is a capable off-road vehicle, and one of the most important aspects of any vehicle’s performance in this environment is its wheel torque specs. Properly tightening your wheels to the manufacturer’s specifications can help ensure that you don’t experience any unexpected issues while traversing rough terrain. The average torque spec for a Toyota 4Runner wheel is 78 ft/lbs, but be sure to check your owner’s manual for exact details specific to your model.

Proper way to torque 4th gen 4Runner wheel hub assembly

What Torque for 4Runner Lug Nuts?

The torque for the lug nuts of a 4Runner will depend on several factors, including the type of wheel being used and the size of the lug nut. Generally speaking, it’s recommended that you use between 80 and 90 foot-pounds when tightening your lug nuts – however this can vary depending on what type of wheel is being used. If you have alloy wheels then you should use 95 to 105 foot-pounds while steel wheels require 75 to 85 foot-pounds.

It’s important to note that if these torques are exceeded then there may be an increased risk in damaging bolts or threading. To ensure proper installation and secure fastening, make sure to check with your local mechanic or dealership for more specific instructions regarding your vehicle’s requirements before attempting any work yourself.

What is the Torque Spec for Lug Nuts?

Torque specs for lug nuts vary depending on the size and type of vehicle you own. For example, a standard car will typically require between 80-100 ft-lbs of torque to properly secure the lug nut in place. It is important to note that over tightening your lug nuts can cause damage or even breakage due to excessive strain being placed on the fastener.

Additionally, under tightening your lug nuts can cause them to come loose which could lead to an accident if it occurs while driving. To ensure proper safety and performance from your vehicle, you should always consult with a mechanic or service technician who is knowledgeable about your make and model before attempting any work yourself. This way you can be sure that you are using the correct torque spec for each individual lug nut so as not to risk damaging either the wheel or other components of your vehicle when performing maintenance tasks yourself.

What Size are the Wheel Nuts on a 2016 Toyota 4Runner?

When it comes to the wheel nuts on a 2016 Toyota 4Runner, you may be surprised to learn that they are all of a standard size. The wheel nut size for the 2016 Toyota 4Runner is 12mm x 1.5 thread pitch and 22mm hex head size with an overall length of 49mm. It is important that when replacing or tightening your wheels, you make sure all the lug nuts are tightened properly and at the same torque setting (generally 85-95 ft/lbs).

If these specifications are not followed correctly, it can lead to vibration in the steering wheel and premature tire wear. Additionally, if over-tightened it could result in damage to both studs and rims so make sure to check your manual for specific instructions regarding torque settings before doing any work on your vehicle’s wheels!

What Size is a Toyota 4Runner Lug Nut?

When it comes to the lug nuts on a Toyota 4Runner, the size will depend on the year and model of your vehicle. The standard for many Toyota 4Runners is 1/2-20 UNF (Unified National Fine Thread), but there are some models that use 12mm x 1.25 or 14mm x 1.5 thread sizes as well. Lug nut size can be found in your owner’s manual or by contacting an automotive parts dealer.

It’s important to note that while these sizes may vary depending on your specific model, they all require 21mm socket and torque wrench for installation or removal of the lug nuts because of their larger size than typical wheel lugs used in other cars and trucks. If you’re unsure about what size fits your car, it’s best to consult with an experienced mechanic who can help you find the right fit for your 4Runner before purchasing any new lug nuts from a store or online retailer.

Toyota 4Runner Wheel Torque Specs


5Th Gen 4Runner Wheel Torque Specs

When installing wheels on a 5th Generation 4Runner, it is important to torque the wheel lug nuts to the manufacturer’s specifications. For this model, that amount is 95-100 ft/lbs of torque for alloy or steel wheels. Additionally, new wheel studs should be torqued in at 80-90 ft/lbs before tightening the lug nuts in place.

2000 4Runner Wheel Torque Specs

The 2000 Toyota 4Runner wheel torque specs require that the lug nuts be tightened to 80 ft-lbs using a torque wrench. It is important to follow these specifications in order to ensure proper wheel installation and prevent wheel damage due to over or under tightening. Additionally, it is recommended that you always use new lug nuts when replacing wheels as they provide better thread engagement and stability compared with reused lug nuts.

4Th Gen 4Runner Lug Nut Torque

When replacing or installing new wheels on a 4th Gen 4Runner, it is important to ensure that the lug nuts are torqued to the correct specification. The proper torque for a 4th Gen Toyota 4Runner is 85 ft-lbs (115 Nm). It is recommended to use a torque wrench when tightening these lug nuts and not just an impact gun.

In addition, all lug nuts should be tightened in a star pattern – alternating between each side of the wheel – so as evenly distribute the clamping force across all of them.


Overall, it is important to properly torque your 4Runner’s wheels in order to ensure that you have a safe and secure driving experience. By following the manufacturer’s guidelines for proper wheel torque specs, you can be sure that your 4Runner will handle everything from daily commutes to off-road adventures with ease and safety. Properly torqued wheels are key in keeping your vehicle running smoothly and safely so make sure you check them often!


  • Zayn

    John Zayn Smith is a renowned truck enthusiast, automotive industry expert, and author. Beginning his career as a mechanic, Zayn's curiosity led him to explore all facets of the trucking world, sharing his insights through in-depth articles on His knowledge spans truck mechanics, trends, and aftermarket modifications, making him a trusted resource for both professionals and hobbyists. Outside writing and mechanics, Zayn enjoys off-roading, truck shows, and family time. Follow his work for the latest in truck-related news and tips.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *