Weathertech Window Deflectors Installation

I’m not a car person. I don’t know how to change my own oil and I get nervous when someone asks me to pop the hood. So, when it came time to install some new Weathertech window deflectors on my car, I was pretty apprehensive.

But, with the help of some clear instructions and a little bit of patience, I was able to get the job done quickly and easily. Here’s how you can do it too…

If you’re looking for a way to keep the elements out of your car while driving, then Weathertech window deflectors are a great option. They’re easy to install and they look great, too. Here’s a quick guide on how to install them.

First, clean the area around the window where the deflector will be mounted. This will help ensure that the adhesive sticks properly. Next, peel off the backing from the adhesive strip on the deflector and apply it to the window.

Press firmly to make sure it’s securely attached. Finally, snap the deflector into place. That’s it!

You’ve now installed your new Weathertech window deflector and can enjoy driving in comfort knowing that you’re protected from the elements.

Weathertech Window Deflectors Installation


How Do You Install Weathertech Side Window Deflectors With Channel Clips?

Installing Weathertech side window deflectors with channel clips is a relatively easy process that should take no more than a few minutes. First, clean the area around the window where the deflector will be installed with soapy water and a cloth to remove any dirt, debris or residue. Next, use the included alcohol prep pad to clean the inside of the window surface.

Once the surface is clean, dry it off with a lint-free cloth. Now you’re ready to install the deflector. Begin by peeling back the adhesive backing on one end of the deflector.

Then align that end with the top corner of your window, making sure that it’s level and flush with the edge of the glass. Press down firmly on that end to adhere it in place, then proceed to do the same with the other end.

How Do You Install a Wind Deflector on a Window?

Assuming you would like a step by step guide on how to install a wind deflector on your car: 1. Start by cleaning the area where the deflector will be attached with alcohol or another cleaner in order to remove any dirt or debris. 2. Next, measure the deflector and cut it to size if necessary.

Most wind deflectors come in a universal size that will fit most cars, but some may need to be trimmed down to fit your specific vehicle. 3. Once the deflector is the correct size, peel off the adhesive backing and attach it to the top of your car’s window frame. Start at one end and work your way down, pressing firmly as you go to ensure good contact between the adhesive and the surface.

4. That’s it! Your wind deflector is now installed and ready to help reduce wind noise and turbulence when driving with your window open.

How Do You Remove Weathertech Rain Guards?

Assuming you are talking about the Weathertech Rain Guards that go on the outside of your car: To remove them, first lift up on the front end of the rain guard. This will release the clips at the top of the rain guard.

Next, pull out on the back end of the rain guard. This will release the bottom clips holding it in place. Finally, slide the rain guard off of your car.

How Do You Install Weathertech Rain Guards on a Toyota Tacoma?

Assuming you would like a step-by-step guide on installing Weathertech rain guards on a Toyota Tacoma: 1. Begin by opening up the driver’s side door of your Tacoma and rolling down the window. 2. With the help of an assistant, hold the rain guard in place at the top of the open window.

3. Once the rain guard is positioned correctly, use a Phillips head screwdriver to start screws into pre-drilled holes along the weather stripping near where the rain guard will be mounted. Do not fully tighten these screws yet. 4. Next, do the same thing on the passenger side door before moving onto back windows.

For rear windows, it may be necessary to slightly lower them in order to get proper placement of the rain guards.

WeatherTech Side Window Deflector Installation Video

How to Install Window Deflectors With Clips

If you want to keep the elements out of your car while driving, one of the best ways to do so is by installing window deflectors. Window deflectors allow fresh air in while keeping rain, snow and debris from getting into your vehicle. They are easy to install and can be found at most auto parts stores.

This guide will show you how to install window deflectors with clips in just a few minutes. What You’ll Need: -Window deflector

-Ruler or measuring tape -Pencil or pen -Drill

-1/8” drill bit -Phillips head screwdriver or drill bit attachment First, you’ll need to measure the length and width of your windows.

Once you have these measurements, transfer them onto the paper template that comes with the window deflector kit. Use a pencil or pen to mark where you will need to drill holes for the installation process. It’s important that you make precise marks so that the holes line up correctly when attaching the clips.

Next, using a 1/8” drill bit, create pilot holes at each of the marked spots on the template. Once all pilot holes have been made, remove the template and set it aside. Next, holding the window deflector up to the window, start attaching each ofthe clips into place starting withthe top two corners.

Weathertech Window Deflectors Problems

If you own a car, you’ve likely heard of WeatherTech. They make a variety of car accessories, including floor mats and window deflectors. While their products are generally well-made and durable, there have been some reports of problems with their window deflectors.

Some customers have reported that the adhesive strips that are used to attach the deflectors to the windows can be too strong, making it difficult to remove them without damaging the paint on your car. Others have said that the deflectors themselves can crack or break after being installed for a while. If you’re considering purchasing WeatherTech window deflectors for your car, it’s important to be aware of these potential problems.

However, many people still find them to be a valuable addition to their vehicle, so ultimately the decision is up to you.

How to Install In-Channel Rain Guards

If you’re looking for a way to keep rain and debris out of your car while driving, in-channel rain guards are a great option. They install directly into the window channel, making them more secure and less likely to fall off than other types of rain guards. Plus, they give your car a sleek, finished look.

Here’s how to install in-channel rain guards on your vehicle: 1. Start by cleaning the area around the window where the rain guard will be installed. This will help ensure that the adhesive sticks properly.

2. Next, measure the length of the window channel so you know how much Rain Guard material you’ll need. 3. Cut the Rain Guard material to size using a sharp knife or scissors. Make sure that the cut is straight so that it will fit snugly into the window channel when installed.

4. Now it’s time to apply the adhesive strip that comes with the Rain Guard kit. Peel off one side of the backing and attach it to one end of the Rain Guard material you just cut (make sure that sticky side is facing up).

How to Remove Weathertech Window Deflectors

Looking to remove your Weathertech window deflectors? Here’s a step-by-step guide on how to do it: 1. Start by opening up your car door.

You’ll need to be able to access the inside of the door panel in order to remove the deflectors. 2. Once you have the door open, take a look at the weatherstripping that is located around the perimeter of the door opening. The deflectors are attached to this weatherstripping with double-sided tape.

3. Carefully peel back the weatherstripping and plastic backing from around the edges of the deflector. Be careful not to damage or tear the weatherstripping as you do this. 4. With the adhesive side exposed, slowly and carefully pull the deflector away from the door panel, being careful not to damage either surface.

If any adhesive residue is left behind, use a clean cloth soaked in rubbing alcohol to remove it safely. 5. Once removed, you can now reinstall your Weathertech window deflectors by following these same steps in reverse order!


In this blog post, Weathertech walks readers through the installation process for their window deflectors. The author provides clear instructions and helpful photos to make the process as straightforward as possible. They also offer a few tips for troubleshooting common issues that may arise.

Overall, the post is concise and easy to follow, making it a great resource for anyone considering installing these deflectors on their own vehicle.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *