2013 Dodge Ram Key Fob Not Working: Quick Fix Guide

If your 2013 Dodge Ram key fob is not working, it may be due to a dead battery, a dirty or damaged key fob, or a malfunctioning system. Quick fixes include replacing the battery, cleaning or repairing the key fob, or programming the key fob. If these do not work, a professional solution such as key fob replacement or system repair may be necessary.

Dodging Ram key fobs are a convenient way to lock and unlock your vehicle, start the engine, and more. However, if your 2013 Dodge Ram key fob is not working, it can be frustrating and leave you feeling stranded. In this blog post, we will explore common causes of key fobs not working, quick fixes, professional solutions, and frequently asked questions to help you get your key fob up and running again.

Credit: www.amazon.com

Common Causes of Key Fob Not Working:

1. Dead battery: The most common cause of a key fob not working is a dead battery. The key fob needs a working battery to transmit the signal to the vehicle.
2. Damaged key fob: The key fob can become damaged over time, which can cause it to stop working. This can be due to physical damage or water damage.
3. Malfunctioning antenna: The antenna in the key fob is responsible for transmitting the signal to the vehicle. If the antenna is damaged, the key fob will not work.
4. Software glitches: Sometimes, the software in the key fob or vehicle can experience a glitch, causing the key fob to stop working.
5. Electrical issues: Electrical issues, such as loose connections or damaged wires, can cause the key fob to stop working.
6. Out of range: The key fob must be within range of the vehicle for it to work. If the key fob is too far away from the vehicle, it will not work.

It is important to identify the cause of the key fob not working in order to determine the best solution. By understanding the most common causes of key fob problems, you can better diagnose and fix the issue, ensuring that your key fob is working properly again.

Quick Fixes for Key Fob Not Working

1. Replacing the Battery: If you suspect that the battery in your key fob is dead, you can try replacing it. To do this, open the key fob and access the battery compartment. Most key fobs use a coin-style battery that is easy to replace. Consult your owner’s manual for specific instructions on replacing the battery in your key fob.
2. Cleaning or Repairing the Key Fob: If the key fob is dirty or damaged, you can try cleaning or repairing it. To clean the key fob, use a soft cloth to wipe it down, being careful not to damage any buttons or components. If the key fob is damaged, you may be able to repair it by replacing a damaged component or having the key fob professionally repaired.
3. Programming the Key Fob: If the key fob is not working and you have replaced the battery and cleaned or repaired the key fob, you can try programming the key fob. To program the key fob, you may need to consult your owner’s manual or take the key fob and vehicle to a professional for programming.

See Also:

2013 Dodge Ram Heater Not Blowing Hot Air 2013 Dodge Ram 1500 4 Wheel Drive Problems 2013 Dodge Ram 1500 5.7 Hemi Serpentine Belt Diagram

2013 Dodge Ram Key Fob Issues

Professional Solutions 2013 dodge ram key fob not working

Solution 1: Key Fob Replacement

Step 1: Gather the necessary tools. To replace the key fob, you will need a screwdriver, a replacement battery, and a new key fob.

Step 2: Remove the key ring from the key fob. This will allow you to access the battery compartment.

Step 3: Remove the screws that hold the battery compartment in place.

Step 4: Replace the dead battery with a new one. Make sure to place the battery in the correct orientation.

Step 5: Replace the battery compartment and tighten the screws.

Step 6: Test the new key fob to ensure it is working properly.

Step 7: If the new key fob is not working, take the key fob and vehicle to a professional for programming.

Solution 2: System Repair

Step 1: Identify the cause of the malfunction. This may involve checking for software glitches, electrical issues, or damage to the system.

Step 2: Gather the necessary tools. Depending on the cause of the malfunction, you may need a screwdriver, electrical tape, or other tools.

Step 3: Repair or replace damaged components. This may involve repairing or replacing a damaged component, such as a damaged antenna, or updating software.

Step 4: Fix any electrical issues. This may involve checking for loose connections, repairing damaged wires, or replacing a damaged component.

Step 5: Test the system to ensure it is working properly.

Step 6: If the system is still not working, take the vehicle to a professional for further diagnosis and repair.

The 2013 Dodge Ram Key Fob won’t Start Truck

If your 2013 Dodge Ram key fob won’t start your truck, there are a few things you can try to get it working again. First, check the battery in the key fob to see if it needs to be replaced. If the battery is fine, then you may need to reprogram the key fob.

You can do this by following these steps:

1. Sit in the driver’s seat of your Dodge Ram truck.

2. Close all doors except for the driver’s door.

3. Insert the ignition key and turn it to the “On” position, but do not start the engine. 4. Press and hold down both the “Lock” and “Unlock” buttons on your key fob at the same time for about 15 seconds or until you hear a chime sound indicating that the programming mode has been entered successfully. 5. Push any button on your newly programmed key fob within five seconds and you should hear another chime sound indicating that the programming was successful.

Conclusion:

When a key fob stops working, it can be frustrating and leave you feeling stranded. However, by understanding the common causes of key fob not working and following these step-by-step solutions, you can get your key fob up and running again and get back on the road. If you are unsure about any aspect of the repair process, it is always best to consult a professional for assistance.