If you have a 2017 Ram 1500, you may have noticed that the cruise control is not working. This is a problem that has been reported by many owners and it appears to be a common issue. There are a few things that you can try to fix the problem yourself, but if nothing works then you will need to take your truck to the dealer or a qualified repair shop.
Here are some things to check if your cruise control is not working: 1. Make sure that the cruise control switch is turned on. This switch is usually located on the steering wheel or near the shifter.
2. Check the fuse for the cruise control system. The fuse box is usually located under the hood of your truck. 3. If neither of those two things work, then you will need to take your truck in for service.
If your 2017 Ram 1500’s cruise control isn’t working, there are a few possible causes. First, check to see if the cruise control switch is turned on. If it is, then the problem may be with the cruise control module or wiring.
If the switch isn’t the issue, then it’s likely that a sensor in the vehicle has failed. The most common sensors that can cause this issue are the speed sensor or the throttle position sensor. A qualified mechanic will be able to diagnose and repair this issue quickly and easily.
WHY CRUISE CONTROL DOES NOT WORK. CRUISE CONTROL FIX
What Could Cause the Cruise Control to Stop Working?
There are a few things that could be causing your cruise control to stop working. One possibility is that the fuse has blown. Another possibility is that the cruise control module has failed.
Finally, it is also possible that the throttle position sensor or speed sensor has failed.
Are There Any Recalls on a 2017 Dodge Ram 1500?
There have been no recalls on the 2017 Dodge Ram 1500 as of yet.
How Do I Reset My Cruise Control?
Assuming you would like tips on resetting your cruise control:
There are a few different ways that you can reset your cruise control, depending on your car model. For most models, the easiest way to reset your cruise control is to simply turn it off and then back on again.
You can usually do this by pressing the button on your steering wheel or dashboard that says “CC.” If this doesn’t work, you may need to consult your car’s owner’s manual for specific instructions. In some cases, you may need to disconnect and reconnect your battery in order to reset your cruise control system.
This is because cruse control systems are often controlled by electronic modules, which can be reset by disconnecting and reconnecting the power source. If you’re not sure how to do this, again, consult your car’s owner’s manual for specific instructions. If neither of these methods works, there may be an issue with your car’s cruise control system itself and you’ll need to take it in for repairs.
You Can See: Speedometer Not Working – How To Fix
How Do You Set Cruise Control on a 2017 Dodge Ram 1500?
Assuming you would like a comprehensive answer to this question:
To set the cruise control on a 2017 Dodge Ram 1500, first press the cruise control button on the steering wheel. Then, use the + or – buttons to set your desired speed.
Once your desired speed is selected, press and hold the SET/RESUME button until “CRUISE” appears on the speedometer display. Finally, release the SET/RESUME button and your cruise control will be set!
2017 Ram 1500 Cruise Control Recall
On July 25, 2017, Fiat Chrysler (FCA) issued a recall for nearly 500,000 Ram 1500 trucks. The recall affects certain model years between 2013 and 2017. The problem is with the cruise control system; it can cause the truck to accelerate on its own, even when the driver has not engaged the system.
This obviously poses a serious safety hazard. FCA says that it is aware of one accident and three injuries that may be related to this problem. If you own a affected Ram 1500, you should take it to a dealer as soon as possible to have it repaired free of charge.
In the meantime, you should avoid using cruise control until your truck has been fixed. This is just the latest in a string of recalls for FCA vehicles. In the past year or so, they have also recalled Jeep Grand Cherokees, Dodge Durangos, Chrysler Pacificas, and other models for various issues ranging from engine fires to transmission problems.
Let’s hope they can get these latest issues sorted out quickly and safely!
Why is My Cruise Control Not Working Dodge Ram
If you have a Dodge Ram and your cruise control is not working, there are a few things that could be causing the problem. First, check to see if the fuse for the cruise control system has blown. If it has, replace it with a new fuse and see if that fixes the problem.
If not, there are a few other things you can check. First, make sure that the cruise control switch on the steering wheel is turned on. Then, check the wiring harness for any loose or damaged wires.
Finally, check the vacuum lines going to the cruise control servo for any leaks or damage. If you find any of these issues, repair them and see if that fixes your cruise control problem.
2018 Ram 1500 Cruise Control Fuse
If your 2018 Ram 1500 is having trouble with the cruise control, you may need to check the fuse. The cruise control fuse is located in the dash panel. To access it, you will need to remove the panel.
Once you have removed the panel, you will see a row of fuses. The cruise control fuse is typically labeled “CC.” If this fuse is blown, it will need to be replaced.
If your 2017 Ram 1500’s cruise control isn’t working, there are a few things you can check to troubleshoot the issue. First, make sure that the cruise control system is turned on and that the speed limit is set correctly. If everything looks good there, check the vehicle’s throttle position sensor to see if it’s working properly.
If not, it may need to be replaced. Finally, if none of these solutions work, you may need to take your Ram 1500 to a dealership or mechanic for further diagnosis and repairs.