2019 Ram 2500 Lug Nut Torque

As anyone who has ever changed a tire knows, lug nuts must be properly tightened to keep the wheel in place. Over time, however, lug nuts can become loose, and if they are not properly re-tightened, the wheel can come off while the vehicle is moving. This is why it is important to know the proper torque for your vehicle’s lug nuts.

The 2019 Ram 2500 requires a torque of 85 ft-lbs for its lug nuts.

The 2019 Ram 2500 is a big and powerful truck that can tow and haul a lot of weight. That power comes with some responsibility, though, and one of the most important things to keep in mind when driving a Ram 2500 is the lug nut torque. If you’re not familiar with lug nut torque, it’s simply the amount of pressure that should be applied to the lug nuts when tightening them.

Too little pressure and the nuts could come loose, leading to wheel problems (and possibly accidents). Too much pressure and you could strip the threads or damage the wheel. The proper lug nut torque for a 2019 Ram 2500 is 80 lb-ft.

That may seem like a lot, but it’s actually not as difficult to achieve as you might think. A good quality torque wrench will do the trick, and there are even some battery-operated impact wrenches that can make quick work of tightening lug nuts. Just remember: when in doubt, always consult your owner’s manual or a professional mechanic before attempting to change your own lug nuts.

It’s better to be safe than sorry!

2020 Ram 1500 Gorilla Lug Nuts

What is the Torque Spec on a Ram 2500?

The torque spec on a Ram 2500 is 80 ft-lbs. This means that the maximum amount of torque that can be applied to the bolts is 80 ft-lbs. Any more than this and you risk damaging or stripping the threads.

What is the Torque for 2016 Ram 2500 Lug Nuts?

The torque for 2016 Ram 2500 lug nuts is 120 ft-lbs. This is the same for both the 4×2 and 4×4 models.

What Should I Torque My Ram Truck Tires To?

There are a few different factors that can affect what you should torque your Ram truck tires to. These include the type of tire, the size of the tire, and the load capacity of the truck. The type of tire will usually dictate how much pressure you need to put in it.

For example, all-terrain tires typically require more pressure than regular passenger car tires. The size of the tire is also important – a larger tire will require more pressure than a smaller one. Finally, the load capacity of your truck is something you need to consider when torquing your tires.

If you’re carrying a lot of weight in your truck, you’ll need to increase the pressure accordingly. Conversely, if you’re not carrying much weight, you can reduce the pressure slightly. As a general rule of thumb, most Ram trucks will require between 60 and 80 PSI in their tires (depending on the factors mentioned above).

So start by inflating your tires to that range and then adjust from there based on how they feel.

What is the Torque Spec for Heavy Duty Truck Lug Nuts?

If you’re looking for the torque spec for heavy duty truck lug nuts, you’ve come to the right place. Here at Torque Spec, we know a thing or two about trucks and their lug nuts. For those not familiar with the term, torque is a measure of rotational force.

In other words, it’s the amount of force required to turn an object like a nut or bolt. The higher the torque, the more force required. When it comes to lug nuts, the torque specification is important because it ensures that the nuts are tight enough to keep the wheels securely attached to the vehicle but not so tight that they’re difficult to remove when necessary.

Most heavy duty trucks have a lug nut torque specification of 85-110 ft-lbs. This means that you should use a wrench to apply between 85 and 110 ft-lbs of force to each lug nut in order to properly secure the wheel. Of course, always consult your truck’s owner’s manual for specific instructions as there may be slight variations depending on make and model.

And if you’re ever in doubt, it’s always best to err on the side of caution and go with a higher torque setting rather than risk having your wheels come loose while driving.

2019 Ram 2500 Lug Nut Torque

Credit: www.amazon.com

2018 Ram 2500 Lug Nut Torque

Today, we’re going to talk about lug nut torque for the 2018 Ram 2500. This is important information to know if you own this vehicle, or if you’re thinking about purchasing one. We’ll go over the proper way to torque your lug nuts, as well as what happens if you don’t do it correctly.

As always, safety is our number one priority. That’s why we always recommend that you consult your owner’s manual before doing any work on your vehicle. Every car is different, and there may be specific instructions for your make and model.

When it comes to torquing your lug nuts, there are two things to keep in mind: First, always use a torque wrench. Second, make sure that you follow the pattern shown in your owner’s manual (or below). If you don’t have an owner’s manual handy, no worries – we’ve got you covered.

The proper way to torque your 2018 Ram 2500’s lug nuts is as follows (using a torque wrench): First Step: Torque all of the lug nuts to 80 ft-lbs Second Step: Torque all of the lug nuts to 100 ft-lbs

Third Step: Loosen all of the lug nuts Fourth Step: Torque all of the lug nuts to 140 ft-lbs Now let’s talk about what happens if you don’t properly torque your lug nuts.

If they’re too loose, they can fall off while you’re driving and cause serious damage (or even an accident). If they’re too tight, they can strip the threads or break completely – both of which will leave you stranded on the side of the road. So it’s really important that you get it right!

Dodge Ram 2500 Lug Nut Torque

If you’re the owner of a Dodge Ram 2500, then you know that lug nut torque is important. After all, properly torqued lug nuts are what keep your wheels from falling off. So how much torque should you use when tightening your lug nuts?

The answer may surprise you – there’s no one-size-fits-all answer to this question. The amount of torque that you’ll need to use will depend on the size of your lug nuts, as well as the type of vehicle that you have. For example, if you have a lightweight car with small lug nuts, then you won’t need to use as much torque as someone with a heavy truck and larger lug nuts.

In general, most experts recommend using between 60 and 80 ft-lbs of torque when tightening lug nuts. However, it’s always best to consult your owner’s manual before making any decisions about how much torque to use.

2017 Ram 2500 Lug Nut Torque

If you’re looking to torque your own lug nuts on a 2017 Ram 2500, here’s what you need to know. The proper torque for the lug nuts on a 2017 Ram 2500 is 80 lb-ft. That’s pretty straightforward, but there are a few things to keep in mind when torquing lug nuts.

First, always use a torque wrench – never attempt to “eye ball” it. Second, make sure the vehicle is properly supported before starting. Third, apply the torque in a crisscross pattern (i.e. start with the lug nut at 12 o’clock and then move to 6 o’clock, 3 o’clock, etc.).

Following these tips will help ensure that your lug nuts are properly torqued and your wheels remain secure.


The 2019 Ram 2500 comes with some new features that make it a great choice for a heavy-duty truck. One of these features is the increased lug nut torque. This means that the truck can handle more weight and stress, making it ideal for towing and hauling.


  • Mr Shamrock

    With more than two decades in the automotive world, Mr_Shamrock is Truckguider's go-to expert for Ford and Chevy Trucks. From the F-150 to the Silverado, his breadth of knowledge covers a wide range of models, making him a reliable resource for buyers, owners, and enthusiasts alike. His expertise is also featured in online communities like Truck Forums, where he offers valuable advice and reviews.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *