2020 Ram Block Heater Location

The 2020 Ram block heater is located on the passenger side of the engine, near the oil filter.

If you’re looking for the 2020 Ram block heater location, you’ll find it on the driver’s side of the engine, near the oil filter. The block heater helps to improve cold weather starting by pre-heating the engine coolant. This can be a helpful feature if you live in an area with cold winters.

Where Is The 2020 Ram Block Heater Located?

The 2020 ram block heater is located in the engine block.

Where Is The 2020 Ram Block Heater Located?
The block heater is located on the passenger side of the engine block, near the oil filter. To access it, you will need to remove the engine cover.

What Is The 2020 Ram Block Heater Location?

The 2020 ram block heater location is on the passenger side of the engine, near the front of the engine block.

If you’re wondering where the 2020 Ram block heater is located, wonder no more! We’ll show you where to find it and how to properly install it.

A block heater is a great way to ensure your engine is warm and ready to go on a cold morning. It’s especially important in cold weather climates.

The block heater on the 2020 Ram is located on the passenger side of the engine block, near the oil filter. It’s a small, black, cylindrical device.

To install the block heater, first locate the electrical plug on the side of the engine block. Then, insert the block heater cord into the plug.

Once the cord is plugged in, wrap it around the engine block a few times and secure it with the provided clip. Finally, plug the other end of the cord into a standard 120-volt outlet.

It’s important to unplug the block heater cord when you’re finished using it. This will help prevent any potential damage to the cord or engine.

Now you know where to find and how to properly install the 2020 Ram block heater!

How Do I Find The 2020 Ram Block Heater Location?

The 2020 ram block heater location is on the passenger side of the engine, near the front of the vehicle.
If you’re looking for the 2020 Ram block heater location, here’s a quick step-by-step guide.

1. Start by opening the hood of your Ram truck.

2. Locate the engine block on the side of the engine compartment.

3. The block heater will be mounted on the engine block, usually on the side or front of the block.

4. Once you’ve located the block heater, you can unplug it from the electrical outlet and remove it from the engine block.

5. To install the block heater, simply reverse the steps above.

A block heater is a great way to keep your engine warm in cold weather, and it’s especially useful if you live in an area with freezing temperatures. By keeping your engine warm, you can extend its lifespan and improve its performance.

Where Can I Find The 2020 Ram Block Heater Location?

The 2020 ram block heater location is under the hood, on the passenger side.
As the weather starts to get colder, you may be wondering where the block heater location is on your 2020 Ram. Block heaters are a great way to ensure your engine stays warm, and they can help prolong its life.

The good news is that the block heater location on a 2020 Ram is fairly easy to find. It is located on the front of the engine, near the oil filter. To access it, simply remove the oil filter and look for the block heater cord.

If you’re not sure how to remove the oil filter, don’t worry. The process is actually quite simple. First, locate the oil filter cap on the front of the engine. Then, use an oil filter wrench to remove the cap. Once the cap is off, you should be able to see the block heater cord.

Once you’ve located the cord, simply plug it into a power outlet and you’re all set! Be sure to unplug the cord when you’re finished using it, as leaving it plugged in can cause damage to the cord.

We hope this helps you find the block heater location on your 2020 Ram. Stay warm out there!

FAQ

Is The 2020 Ram Block Heater Easy To Locate?

Yes, the 2020 ram block heater is easy to locate. It is located on the front of the engine, just behind the radiator.

What Are The Benefits Of Using A 2020 Ram Block Heater?

The biggest benefit of using a 2020 ram block heater is that it can significantly improve the engine’s cold weather performance. In fact, it can help the engine to start in as little as 20-30 seconds, which is a significant improvement over the several minutes it would take without the heater. Additionally, the block heater can help to prevent engine damage that can occur during cold weather starts.

How Do I Use The 2020 Ram Block Heater?

To use the 2020 ram block heater, first make sure that the engine is cool. Then, locate the block heater cord and plug it into a 120-volt outlet. Once the cord is plugged in, the block heater will automatically turn on and begin to heat the engine.

What Are The Instructions For The 2020 Ram Block Heater?

The 2020 Ram block heater instructions are as follows:

1. Locate the block heater cord on the front of the engine.

2. Plug the block heater cord into a 120-volt AC outlet.

3. Leave the block heater cord plugged in for at least six hours prior to starting the engine.

4. Unplug the block heater cord from the outlet and from the engine before starting the engine.

Conclusion

The 2020 ram block heater location is in the front of the engine, under the hood.

Hopefully, you are clear on the 2020 ram block heater location now. If you still have any questions, feel free to comment below.

Author

  • Zayn

    Zohn Zayn Smith is a seasoned automotive enthusiast with over 15 years of experience in the industry. As the Founder and Chief Editor of Truckguider, he specializes in Dodge Ram models, including the Ram 1500 and Ram 2500. His deep understanding of these trucks makes him a trusted authority on everything from performance and maintenance to towing capabilities.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *