2019 Ram 1500 3.6 Oil Filter Location
The oil filter on a 2019 Ram 1500 3.6 is located under the hood, near the front of the engine, toward the passenger side. To access it, you will need to open your hood and locate the black plastic cover that is attached to your engine block with several nuts and bolts. Once removed, you will be able to see and access the oil filter which should be easily recognizable due its red color.
Before replacing any parts, make sure that your vehicle’s ignition is in “Off” mode for safety reasons as well as making sure that all surfaces are free from dirt or debris before proceeding with any repairs or maintenance tasks.
The 2019 Ram 1500 is an impressive truck with a powerful 3.6-liter V6 engine, and one of the most important parts to maintain in order to keep it running smoothly is the oil filter. Fortunately, locating the oil filter on this model is easy – it’s located on the lower driver’s side corner of the engine compartment near where you’ll find the dipstick. Make sure to follow your vehicle manufacturer’s instructions for changing out your oil filter regularly for optimal performance.
2019 Dodge Ram V6 oil filter location
Where is the Oil Filter on a 3.6 Dodge?
The oil filter on a 3.6 Dodge can be found near the bottom of the engine block, usually just above or beside the oil pan. It is typically located close to where the oil drain plug is. The filter itself looks like an elongated cylinder and is usually white or black in color.
To change it, you will need to loosen and remove the mounting screws that hold it in place before removing it from its housing unit. If your vehicle has an inspection cover, this should provide easy access to the filter without having to take out any other parts of your engine’s components first. When reinstalling it back into its housing unit, make sure that all connections are tightened firmly so that no leaks occur when running your vehicle again afterwards.
Where is the Oil Filter at on a 2019 Dodge Ram 1500?
The oil filter on a 2019 Dodge Ram 1500 is located under the hood. It’s typically towards the front of the engine, on the driver’s side. To access it you will need to remove several components such as a plastic guard, air intake hose and any other surrounding parts that may be blocking your view of it.
Once these are removed, you should be able to easily identify and access the oil filter for changing or replacing as needed. Make sure to properly dispose of any used filters in an environmentally friendly way – this can usually be done at most auto repair shops or recycling centers in many areas.
What Oil Does a 2019 Ram 1500 Classic 3.6 Take?
The 2019 Ram 1500 Classic 3.6 utilizes a 5.7L V8 engine and requires a motor oil that meets the specifications of MS-6395. This type of oil is specifically formulated for gasoline engines and contains detergents, dispersants, anti-wear additives and corrosion inhibitors to help keep your vehicle running smoothly. The recommended viscosity levels are 0W-20 or 5W-20 synthetic motor oil if you live in cold weather areas while 0W-30 or 5W-30 synthetic motor oils are suggested elsewhere.
It is important to note that when purchasing motor oil, it must meet the standards outlined by the manufacturer as some off brand substitutes may not be suitable for use in this vehicle’s engine.
How Many Quarts of Oil Does a 2019 Dodge Ram 1500 3.6 L Take?
The 2019 Dodge Ram 1500 3.6 L engine requires a total of 6 quarts of oil to maintain proper performance. Depending on the type of oil used, this can range from SAE 5W-20 to SAE 0W-40 synthetic motor oils for optimal protection and longevity. It is important to note that these requirements are different for vehicles made before or after 2018, so it is always best to consult your owner’s manual or service center if you have any questions about what type and how much oil your vehicle needs.
Additionally, when adding oil, make sure not to overfill as this could cause damage down the line; check with an auto repair specialist if you need help determining the correct amount needed for your specific vehicle.
Credit: www.reddit.com
2019 Ram 1500 3.6 Oil Drain Plug Location
The oil drain plug for the 2019 Ram 1500 3.6 is located on the lower left side of the engine block, just above the exhaust manifold. It should be easily accessible and identifiable by its unique shape and size. Be sure to use a properly-sized socket wrench when removing or replacing it in order to ensure a secure fit.
2022 Ram 1500 3.6 Oil Filter Location
The oil filter on the 2022 Ram 1500 3.6 is located near the front of the engine, underneath the air intake manifold and behind the alternator. It’s accessible from beneath the vehicle with a ratchet wrench or socket set. Be sure to replace your oil filter regularly as part of regular maintenance in order to keep your vehicle running smoothly and efficiently.
2019 Ram 1500 3.6 Oil Capacity
The 2019 Ram 1500 with a 3.6 liter engine has an oil capacity of 6 quarts, including the filter. This is slightly higher than other vehicles in its class as most trucks come equipped with 5 quart oil tanks. It’s important to keep up with regular maintenance and check your oil levels frequently to ensure that you get maximum performance out of your vehicle.
Conclusion
The 2019 Ram 1500 3.6 oil filter is located on the passenger side of the engine, near the firewall. This location makes it easy to locate and replace with a new one when necessary. With proper maintenance, this oil filter can help keep your vehicle running in top shape for many years to come.
If you ever experience any issues or need further assistance regarding the location of your 2019 Ram 1500 3.6 oil filter, be sure to consult with an experienced automotive technician for more information.
