Dodge Ram 1500 Pinion Bearing Replacement Cost

The cost of replacing the pinion bearing on a Dodge Ram 1500 depends on several factors including make and model year, labor rates, parts costs, and more. Generally speaking, the average cost for a new bearing is around $150-$200. Labor to install the new bearing can range from $75-$125 depending on local labor rates.

Other components such as seals or yokes may also be needed which will increase the total cost of replacement up to an additional $100 or so. Keep in mind that some vehicles may require special tools which may add extra costs to your repair bill.

Replacing the pinion bearing on your Dodge Ram 1500 is a necessary task that comes with a hefty price tag. Depending on the model, labour costs alone can range from $300 to over $500, and parts typically cost around $200. It’s important to factor in these replacement costs when budgeting for upkeep of your vehicle; otherwise you may find yourself stuck in an unexpected financial situation as soon as something goes wrong.

dodge ram pinion bearing replacement

How Much Does It Cost to Replace a Pinion Bearing?

When it comes to replacing a pinion bearing, the cost can vary depending on the make and model of your vehicle. Generally speaking, you can expect to pay anywhere from $100 to $1,000 for the parts and labor required. The cost also depends on whether or not you’re having an independent mechanic or dealership do the work for you.

If you have an older car that hasn’t been serviced in some time, then additional parts may be needed which will drive up the total bill even further. It’s important to note that if there is damage done by another part such as a driveshaft U-joint, then these too must be replaced along with the pinion bearing. This could mean additional costs ranging into hundreds of dollars more than just replacing just a single part alone.

So when looking into replacing your pinion bearing it’s best practice to get a full diagnosis before committing yourself financially – otherwise unexpected surprises may await!

What Happens When Pinion Bearing Goes Out?

When a pinion bearing goes out, it can cause a variety of issues for the vehicle. The most common symptom is an unpleasant noise coming from the rear axle or differential area when accelerating or decelerating. This noise may be heard in either forward or reverse and will often grow louder as speed increases.

Additionally, if the bearing has completely seized up, it may also result in a vibration that can be felt through the floorboard of your car. In some cases, you may even experience difficulty shifting gears due to excessive resistance caused by worn bearings on shafts within the transmission system. It’s important to get any suspected pinion bearing issue looked at right away because failure to do so could lead to further damage down the road including complete destruction of your axle assembly components which would require costly repairs.

It’s best practice to have all your mechanical components checked regularly and replaced as needed with high quality parts that are designed for long-term performance and reliability.

What Does a Worn Pinion Bearing Sound Like?

A worn pinion bearing will make a loud, grinding sound when the vehicle is in motion. This noise may be accompanied by vibrations that can be felt through the floor of your car or truck. It’s important to pay attention to any noises you hear coming from underneath your hood, as they could signify a serious problem with your drivetrain.

A grinding sound emanating from the pinion bearing could indicate that it is failing and needs replaced before major damage occurs. Generally speaking, this type of repair should not be attempted without professional assistance as incorrect installation or adjustment of components can lead to further costly repairs down the road. If you are hearing an unusual noise while driving, it’s best to have it checked out right away by an experienced mechanic who can quickly diagnose and resolve any issues with your pinion bearing.


How Long Do Pinion Bearings Last?

Pinion bearings are a vital part of any vehicle’s suspension system, and they play an important role in keeping your car driving smoothly. Generally speaking, pinion bearings can last anywhere from 50,000 to 70,000 miles before needing to be replaced. However, this number is highly contingent on the condition of the bearing itself as well as how it was maintained over its lifetime.

If you don’t regularly replace worn-out parts in your suspension system or perform routine maintenance on these components, then it’s likely that your pinion bearings will need to be changed much sooner than normal. Additionally, if you drive off-road or tend to use your vehicle under extreme conditions (like during racing), then you should expect that their lifespan will decrease significantly due to increased wear and tear. So while there is no hard rule for exactly how long a pinion bearing can last for each individual vehicle—it ultimately depends on a variety of factors—you should always keep an eye on them and make sure they’re properly lubricated in order to get the most out of them!

Dodge Ram 1500 Pinion Bearing Replacement Cost


Dodge Ram 1500 Wheel Bearing Replacement Cost

The cost of replacing a wheel bearing on a Dodge Ram 1500 can vary significantly depending on the model year, whether it is front or rear-wheel drive and the type of bearing that needs to be replaced. Generally, you can expect to pay anywhere from $200 – $500 for labor and parts. If you are looking to save money, it may be worth considering doing this job yourself if you have experience with automotive repair tasks.

Dodge Ram 1500 Rack And Pinion Replacement Cost

Replacing the rack and pinion on your Dodge Ram 1500 is not a cheap task, but it is an important one to complete in order to keep your truck running smoothly. The cost of this replacement will depend on the make and model of your vehicle, as well as labor costs at your local auto repair shop. Generally, you can expect to pay between $1000-$1500 for a complete rack and pinion replacement job.

2013 Ram 1500 Pinion Bearing Replacement

Replacing the pinion bearing on a 2013 Ram 1500 is an important part of regular maintenance. The process can be done relatively easily with the right tools and parts, but it’s important to take your time and do it correctly so that you don’t damage any other components in the vehicle. It’s also a good idea to consult a professional if you’re unsure of how to proceed.

Doing this will help ensure that your truck runs smoothly for years to come.


The Dodge Ram 1500 is a reliable and dependable vehicle that requires regular maintenance to keep it running smoothly. Replacing a pinion bearing can be an expensive repair, but the cost of replacing a pinion bearing on your Dodge Ram 1500 will vary depending on where you have the work done and what parts are needed for the job. It is important to remember that investing in routine maintenance and repairs for your Dodge Ram 1500 can help ensure that it continues to perform at its best over time.


  • Zayn

    Zohn Zayn Smith is a seasoned automotive enthusiast with over 15 years of experience in the industry. As the Founder and Chief Editor of Truckguider, he specializes in Dodge Ram models, including the Ram 1500 and Ram 2500. His deep understanding of these trucks makes him a trusted authority on everything from performance and maintenance to towing capabilities.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *