2012 Ram 1500 Tpms Reset Button Location

The tire pressure monitoring system (TPMS) reset button on the 2012 Ram 1500 is located on the driver’s side dashboard, just under the steering wheel. It may be hidden by a plastic cover or trim panel, so you might need to remove it in order to see and access the button. The TPMS reset button looks like a tiny black square with an arrow pointing up.

To reset your vehicle’s TPMS, press down firmly but lightly on this button for two seconds until you hear a “beep” sound coming from your car’s speakers. This indicates that your RAM 1500 has been successfully reset and that its tires are now being monitored again at optimal levels of pressure.

If you own a 2012 Ram 1500, you may need to reset the Tire Pressure Monitoring System (TPMS) from time to time. Thankfully, this process is relatively simple and can be done without any special tools or knowledge. The TPMS reset button is located on the driver-side dashboard near the steering wheel.

To reset your system, simply press and hold down the TPMS reset button for approximately 10 seconds until you hear a chime indicating that it has been successfully reset.

2012 dodge ram 1500 tpms system relearn or reset

Where is the Tpms Reset Button Located?

The Tire Pressure Monitoring System (TPMS) reset button is located in the glove compartment of your vehicle. It’s usually a small silver or black button that you can press with a pencil, pen, or other pointed object. When pressed, it will allow you to reset the tire pressure sensors and restore their accuracy.

The TPMS reset button should only be used when instructed by the owners manual or service center technicians as incorrect use may result in inaccurate readings from all four tires. Additionally, some vehicles have an automatic tire pressure monitoring system that does not require any intervention from the user to operate correctly so it is important to check for this feature before attempting to manually reset your TPMS system.

Where is the Tpms Module on a 2012 Ram 2500?

The Tire Pressure Monitoring System (TPMS) module on a 2012 Ram 2500 is located near the left rear wheel, in between the frame and fuel tank. It’s held in place with two 8mm bolts which need to be removed before it can be accessed. The module itself is about 10 inches long, 4 inches wide, and 2 inches deep.

In addition to the TPMS module, there are several other components that go along with it including sensors for each tire, an antenna for transmitting data wirelessly from the tires to the vehicle’s onboard computer system, as well as a receiver that collects all of this information. All of these parts work together to ensure your tires remain inflated at safe pressure levels so you can drive safely on any road or highway surface.

How Do You Relearn Dodge Tpms?

Relearning a tire pressure monitoring system (TPMS) in your Dodge vehicle is a simple process that only takes a few minutes. First, you should check to make sure the TPMS sensors are working correctly and all of the tires have been properly filled with air. Once this has been done, you can begin the relearning process.

Start by turning off the ignition and then open your driver-side door. After this, press down on the brake pedal five times within 15 seconds while still keeping your foot on it. Then turn on the ignition without releasing your foot from the brake pedal until three horn chirps sound or until “TPM Learn” appears in your dashboard display window – whichever comes first.

At this point, each wheel will need to be addressed individually: rotate each wheel for 3 revolutions and make sure each time it stops at 12 o’clock position before moving onto another wheel; when finished cycling through all four wheels, four horn chirps will sound as confirmation that relearning has completed successfully. Lastly, carefully drive around for several miles so that TPMS can adjust settings accordingly and you’re good to go!

How Do You Reset Tpms Without Reset Button?

Resetting a Tire Pressure Monitoring System (TPMS) without a reset button is possible with some models of TPMS, though it may require special tools and expertise. Before attempting to reset the system yourself, consult your vehicle’s user manual or contact an automotive technician for specific instructions. If you are comfortable performing the reset process yourself, begin by checking your car’s owner’s manual for any specific instructions provided by the manufacturer on how to do so.

The basic procedure involves using a scan tool to access the TPMS data from the car’s computer and then programming new tire pressure settings into the system. Once these steps have been completed, you should be able to use your vehicle with its new tire pressure settings without having used a dedicated reset button. While this method can save time over having to physically press each individual sensor in order to complete a factory-default reset of all tires at once, caution must still be taken when performing any type of DIY repair work on vehicles as mistakes or incorrect procedures can lead to expensive repairs down-the-road.

2012 Ram 1500 Tpms Reset Button Location

Credit: www.ramforum.com

Where is the Tpms Reset Button Ram 1500

The TPMS reset button on the RAM 1500 is located in the glove compartment. To access it, open the glove box and press down firmly on the cover until it pops open to reveal the reset button. You may need to use a flat head screwdriver or other tool to push down on the cover if necessary.

Once you have located and pressed down on this reset button, your Tire Pressure Monitoring System will be reset and ready for proper functioning again.

2011 Ram 1500 Tpms Reset Button Location

The Tire Pressure Monitoring System (TPMS) Reset Button on the 2011 Ram 1500 can be found in the driver’s side kick panel, next to the emergency brake. The reset button will allow you to reset the system and clear any warning indicators that may have been displayed. To access it, simply remove the kick panel and press down firmly on the reset button until a chime is heard.

2013 Ram 1500 Tpms Reset Button Location

The Tire Pressure Monitoring System (TPMS) reset button on the 2013 Ram 1500 is located within the glove box. When pressed, this button allows you to reset your tire pressure monitoring system after changing a tire or refilling air in any of the tires. Keeping an eye on your TPMS can be important for safety and fuel efficiency, so make sure to use the reset button regularly.


Overall, the 2012 Ram 1500 TPMS Reset Button location is fairly easy to locate. It is located on the left side of the steering column and can be easily accessed with a flathead screwdriver. Knowing the exact location of this reset button will ensure that drivers are able to quickly reset their TPMS after any adjustments have been made or if they experience other issues related to their tire pressure monitoring system.


  • Zayn

    Zohn Zayn Smith is a seasoned automotive enthusiast with over 15 years of experience in the industry. As the Founder and Chief Editor of Truckguider, he specializes in Dodge Ram models, including the Ram 1500 and Ram 2500. His deep understanding of these trucks makes him a trusted authority on everything from performance and maintenance to towing capabilities.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *