2019 Ram 1500 Front Axle Nut Size

The 2019 Ram 1500 comes with a few different axle nut size options. The most common size is the M14x1.5, but there are also some that come in at M12x1.5 and M16x1.5. Depending on which model you have, the front axle nut size may be different.

If you’re unsure of which size to get, it’s always best to consult your owner’s manual or ask a dealer for help.

The 2019 Ram 1500 comes with a front axle nut size of 22 millimeters. This is the same size as the previous model year, so if you’re looking to upgrade your Ram 1500’s front axle, you’ll need to purchase a new nut that matches this size.

Wheel Bearing Replacement 2019 Ram 1500 Classic 4X4 | How To Replace Front Right Hub Assembly

What Size Socket Fits the Axle Nut?

Assuming you are referring to a standard vehicle axle nut, the size socket you will need is 3/4″. However, it is important to note that some vehicles have different size axle nuts, so it is always best to check your owner’s manual or with a professional mechanic to be sure. If you are working on a car or truck at home, changing the oil or rotating the tires, for example, you will need the right size socket to remove and replace the axle nut.

An impact wrench is often used to loosen and tighten an axle nut because they can apply more torque than a regular ratchet wrench. It is important to make sure that the lug nuts or bolts (which hold the wheel onto the axle) are properly tightened before attempting to remove or replace the axle nut. These usually require less torque to loosen or tighten than an axle nut.

What Size is the Axle Nut on a 94 Dodge Ram 1500?

Assuming you are referring to the wheel lug nut size, it is 1/2”-20.

What Size is the Spindle Nut on a 2001 Dodge Ram 1500?

The spindle nut size on a 2001 Dodge Ram 1500 is 1-1/4 inches. This is a standard size for many vehicles and allows for easy replacement of the spindle nut if it becomes damaged or worn out.

Do You Need a Special Socket for Axle Nut?

No, you don’t need a special socket for an axle nut. Any good quality socket will do the job just fine. However, if you have an impact wrench, then using a impact-rated socket is recommended.

2019 Ram 1500 Front Axle Nut Size

Credit: www.genosgarage.com

2016 Ram 1500 Front Axle Nut Size

If you’re in the market for a new truck, the 2016 Ram 1500 is a great option. It’s a versatile and powerful truck that can handle just about anything you throw at it. One important thing to consider when purchasing a new vehicle is the front axle nut size.

This is an important factor to keep in mind when choosing tires and wheels for your truck. The standard front axle nut size for the 2016 Ram 1500 is 1-1/2″. This means that you’ll need to use a 1-1/2″ socket or wrench to remove or install the front axle nuts. Keep this in mind when selecting tires and wheels for your truck.

With the right tools, you can easily change out your tires and wheels to customize your truck to your own personal style.

2017 Ram 1500 Front Axle Nut Size

The front axle nut size on a 2017 Ram 1500 is 1-1/8″. This size is specific to the Ram 1500 and may be different on other models. It’s important to know the right size when replacing or tightening the front axle nut.

Using the wrong size can damage the threads and cause problems down the road.

Ram 1500 Cv Axle Nut Size

The Ram 1500 is a full-size pickup truck that was first introduced in 1994. It is currently in its fourth generation of production. The Ram 1500 is available in a variety of trim levels and configurations, and it can be equipped with either a gas or diesel engine.

One of the most important aspects of any vehicle is the suspension, and the Ram 1500 is no exception. The front suspension on the Ram 1500 uses coil springs, while the rear suspension uses leaf springs. Both suspensions are supported by shock absorbers.

The front wheels are also connected to the frame of the truck via control arms, which allow for up and down movement. The rear wheels are connected to the frame via trailing arms. The CV axle is an important part of the suspension system on any vehicle, but it is especially important on a truck like the Ram 1500 because of its heavy payload capacity.

The CV axle helps to transfer power from the engine to the wheels while also providing support for the weight of the vehicle. The CV axle consists of two parts: an inner shaft and an outer housing.


The 2019 Ram 1500 has a front axle nut size of 27mm. This is larger than the previous model year’s nut size, which was 24mm. The increased size helps to improve strength and durability, making it less likely that the front axle will fail.

You Can Read Also:


  • Zayn

    Zohn Zayn Smith is a seasoned automotive enthusiast with over 15 years of experience in the industry. As the Founder and Chief Editor of Truckguider, he specializes in Dodge Ram models, including the Ram 1500 and Ram 2500. His deep understanding of these trucks makes him a trusted authority on everything from performance and maintenance to towing capabilities.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *