How To Reset Service Advancetrac
The AdvanceTrac system is a valuable feature in Ford vehicles that enhances stability and traction control. However, if there is an issue detected in the system, it may trigger the AdvanceTrac service light on the dashboard.
Resetting this light is important to ensure the system is functioning properly, and the process may differ based on the vehicle’s make and model. In this article, we provide a comprehensive guide on resetting, turning off, and clearing the AdvanceTrac service light, including step-by-step instructions and important tips to follow.
You Can See: How To Reset Steering Angle Sensor Without Scanner – Easy Tips
AdvanceTrac System Problem Fix
- Sit in the driver’s seat and turn on the ignition without starting the engine. Make sure all doors are closed.
- Look for the “Menu” or “Setup” button on your dashboard. This button is usually located near the instrument cluster, either on the steering wheel or the dashboard itself.
- Press the “Menu” or “Setup” button until you see the “Service” or “Maintenance” menu on your instrument cluster display.
- Use the arrow keys or scroll button to navigate to the “Reset” or “Reset Service” options. This option may also be labeled as “Oil Life” or “Oil Change.”
- Once you’ve highlighted the “Reset” or “Reset Service” option, press the “OK” or “Enter” button to select it.
- The instrument cluster display will then ask you to confirm that you want to reset the service light. Press “OK” or “Enter” again to confirm.
- Wait for the system to display a message confirming that the reset has been completed. This message may read “Service Reset” or “Oil Life Reset.”
- Turn off the ignition and wait a few seconds before restarting the engine. Check that the AdvanceTrac service light has been reset and is no longer illuminated on the instrument cluster.
Please note that the exact steps for resetting the AdvanceTrac service light may vary depending on the make and model of your vehicle. Therefore, it’s always a good idea to refer to your owner’s manual for specific instructions for your particular vehicle.
Service AdvanceTrac – Quick Fix
How to Turn Off Service Advancetrac
To turn off the AdvanceTrac service light, you will need to perform the following steps:
- Ensure that your vehicle is turned off and the key is removed from the ignition.
- Open the hood of your vehicle and locate the battery.
- Use a wrench or a pair of pliers to disconnect the negative terminal of the battery.
- Wait for at least 15 minutes before reconnecting the negative terminal of the battery.
- Reconnect the negative terminal of the battery and ensure it is tightened securely.
- Start the engine and allow it to idle for a few minutes.
- Check the instrument cluster to ensure that the AdvanceTrac service light is no longer illuminated.
Please note that disconnecting the battery may also reset other settings and systems in your vehicle, such as the radio presets and clock. Therefore, you may need to reset these settings after reconnecting the battery.
Additionally, if the service light comes back on after performing this procedure, there may be an underlying issue with your AdvanceTrac system that needs to be addressed.
What is the Ford F150 Service Advancetrac Reset Procedure?
The Ford F150 service AdvanceTrac reset procedure may vary depending on the model year and trim level of your vehicle. Here are the general steps you can follow:
- Turn on the ignition without starting the engine.
- Press the “Setup” or “Menu” button on your dashboard until you see the “System Check” or “Vehicle Settings” menu.
- Use the arrow keys or scroll button to select the “AdvancTrac” or “Electronic Stability Control” option.
- Press and hold the “OK” button until the “Resetting to Factory Settings” message appears on the screen.
- Release the “OK” button and wait for the system to complete the reset process.
- Turn off the ignition and wait for at least 10 seconds before starting the engine.
- Start the engine and check the instrument cluster to ensure that the AdvanceTrac service light is no longer illuminated.
Please note that the specific steps for resetting the AdvanceTrac service light on your Ford F150 may differ depending on the model year and trim level. Therefore, it’s always a good idea to refer to your owner’s manual for specific instructions for your particular vehicle.
How to Clear Service Advancetrac
To clear the AdvanceTrac service light, you can follow these general steps:
- Turn on the ignition without starting the engine.
- Look for the “Menu” or “Setup” button on your dashboard. This button is usually located near the instrument cluster, either on the steering wheel or the dashboard itself.
- Press the “Menu” or “Setup” button until you see the “Service” or “Maintenance” menu on your instrument cluster display.
- Use the arrow keys or scroll button to navigate to the “Reset” or “Reset Service” options. This option may also be labeled as “Oil Life” or “Oil Change.”
- Once you’ve highlighted the “Reset” or “Reset Service” option, press the “OK” or “Enter” button to select it.
- The instrument cluster display will then ask you to confirm that you want to reset the service light. Press “OK” or “Enter” again to confirm.
- Wait for the system to display a message confirming that the reset has been completed. This message may read “Service Reset” or “Oil Life Reset.”
- Turn off the ignition and wait a few seconds before restarting the engine. Check that the AdvanceTrac service light has been cleared and is no longer illuminated on the instrument cluster.
Please note that the specific steps for clearing the AdvanceTrac service light may differ depending on the make and model of your vehicle. Therefore, it’s always
How to Fix Service Advancetrac Ford Explorer
To fix the “Service Advancetrac” warning light on a Ford Explorer, follow these steps:
Diagnose the issue:
First, you need to determine the cause of the problem. This can be done using an OBD-II scanner (On-Board Diagnostics tool) to retrieve any Diagnostic Trouble Codes (DTCs) stored in the vehicle’s computer. These codes will give you an idea of what components might be causing the issue.
Common causes:
Some common causes for the “Service Advancetrac” warning light include issues with the wheel speed sensors, steering angle sensor, or the ABS control module. It is essential to investigate these components to determine if they need repair or replacement.
Check wheel speed sensors:
Inspect the wheel speed sensors for damage or corrosion. Clean the sensors and connectors with a contact cleaner if necessary. If you find any damaged sensors, replace them.
Check the steering angle sensor:
Inspect the steering angle sensor, which is usually located near the steering column. Ensure the connections are clean and secure, and the sensor is functioning correctly. Replace the sensor if it’s found to be faulty.
Check the ABS control module:
The ABS control module manages the Advancetrac system. If it’s faulty, it can cause the “Service Advancetrac” warning light to come on. Check the module for any signs of damage or corrosion, and repair or replace it if necessary.
Clear the codes:
Once you have fixed the issue, use the OBD-II scanner to clear the stored DTCs from the vehicle’s computer. This should reset the “Service Advancetrac” warning light.
Test drive:
Take the vehicle for a test drive to ensure the problem has been resolved, and the “Service Advancetrac” warning light does not reappear.
Note: If you’re unsure about any of the steps mentioned or lack the necessary tools, it is always a good idea to consult with a professional mechanic.
you estimate the cost of repairs and let you know if there are any discounts or coupons available.
FAQs
What is Service Advancetrac?
Service Advancetrac is an electronic stability control system that is commonly found in Ford vehicles. It helps to improve the handling and stability of the vehicle, especially in difficult driving conditions.
Why should I reset Service Advancetrac?
Resetting Service Advancetrac is important because it can help to ensure that the system is functioning properly. Over time, the system can become calibrated incorrectly, which can cause it to not work as effectively as it should.
Additionally, if you have recently replaced any of the tires on your vehicle, it is important to reset Service Advancetrac so that the system can recalibrate itself to the new tire size.
How often should I reset Service Advancetrac?
It is not necessary to reset Service Advancetrac on a regular schedule. However, if you notice that the system is not working properly or if you have recently replaced any of the tires on your vehicle, it is a good idea to reset the system.
Can I reset Service Advancetrac myself or do I need to take it to a mechanic?
In most cases, you should be able to reset Service Advancetrac yourself by following the steps outlined in this guide. However, if you are unsure about the process or if you are experiencing any difficulty, it is always a good idea to consult a professional mechanic.
ford f150 advancetrac light fix
You Can Read Also:
Conclusion
In conclusion, resetting, turning off, or clearing the AdvanceTrac service light is an essential process that helps ensure the proper functioning of the AdvanceTrac system in your vehicle. As we have seen, the procedure may vary depending on the make and model of your vehicle, so it’s essential to refer to your owner’s manual for specific instructions.
Whether you’re driving a Ford F150 or any other vehicle with the AdvanceTrac system, following the instructions outlined in this article can help you reset the service light and ensure a safe and comfortable driving experience.
As your virtual assistant, I’m always here to provide you with helpful and informative articles that can help you maintain your vehicle’s optimal performance. So, if you have any questions or concerns, feel free to ask, and I’ll be happy to assist you.
