How to Reset Traction Control Light Ram 1500

To reset the traction control light on a Ram 1500, you will need to first locate the fuse box inside your vehicle. Once located, find the fuse labeled “TCS” and remove it for 30 seconds before replacing it back into its original slot. Start up your engine and wait for any warning lights to turn off.

If they do not, you may need to check your tire pressure or get an alignment check done as this can also cause warning lights to come on in some cases. Additionally, if issues persist after resetting the TCS fuse, take your vehicle into a mechanic who is able to diagnose and fix any mechanical problems that could be causing the issue with your traction control system.

  • Start the engine and turn on the ignition
  • Make sure all accessories are turned off, including the radio and air conditioning
  • Place the shifter in neutral position, then press down firmly on both brake pedals for 10 seconds or until traction control light goes off
  • Push and hold “Traction Control” button on dashboard for 5 to 10 seconds, until you hear a chime sound coming from the vehicle’s audio system indicating that Traction Control has been reset successfully
  • Release “Traction Control” button and wait for 3-5 seconds before turning it back ON again by holding it down for another 5 to 10 seconds, this time without hearing any chimes from your audio system as verification that Traction Control is now active again within your Ram 1500 truck

ABS and traction control light stay on – 2012 Ram fix

How Do I Get the Traction Control Light Off?

If your car is equipped with traction control, you may have noticed that the light on the dashboard occasionally comes on. If this happens, it could mean there’s a problem with your vehicle’s electronic stability system. To get the traction control light off, you should check to make sure your tires are properly inflated and that they all match in size.

If they don’t match or if one of them appears to be low, inflate it until it matches the other three tires. You should also check for any loose lug nuts and ensure they’re tightened properly before driving. If these steps don’t work, then you might need to take your car into a mechanic to have it looked at more closely as there could be an issue with one of the sensors or solenoids in the system itself.

Whatever you do, though, never drive with a warning light illuminated—it could cause further damage and put yourself and others in danger if not addressed promptly.

How Do I Reset My Abs And Traction Control Light?

Resetting the ABS and traction control light on your car can be a quick and easy process. However, you should always consult your owner’s manual for specific instructions related to your vehicle before attempting to reset the lights. Most often, resetting these lights involves disconnecting the battery for approximately 30 minutes or so and then reconnecting it.

This will cause all of the stored codes in the engine computer to be cleared out, including any codes that are causing your ABS and traction control light to come on. It is important to note that when disconnecting battery power, all radio presets may need to be re-entered as well as certain settings like clock time or other customization options may have been lost due to power being removed from those systems while disconnected from power supply. After reconnecting back up make sure everything is working properly by starting up car with key and see if lights have gone off; if not then it might require further diagnosis of issue with help of scan tool or technician at dealership or repair shop.

Why Wont My Traction Control Light Go Off?

If your traction control light won’t go off, it can be very frustrating. Fortunately, there are a few potential causes and solutions that you can try to get the light to turn off. One of the most common reasons why this happens is because of an issue with either the tire pressure or wheel alignment.

If your tires are not properly inflated or if your wheels are out of alignment, it can cause the traction control system to malfunction and stay on even when driving on dry roads. You should start by checking your tire pressure with a gauge and making sure that all four tires have equal readings. If any one tire is significantly lower than the others, then you may need to inflate them back up to their prescribed pressures before continuing further investigation into why your traction control light isn’t going off.

Additionally, if you haven’t had a wheel alignment done in some time (or ever) then taking it into a shop for service could also solve this issue as well as improve overall vehicle performance and fuel efficiency. Another potential culprit for why the traction control light won’t turn off could be related to brake issues such as worn pads or rotors which would require replacing at some point anyway for safety reasons so make sure that they’re checked too! Lastly, sensors within the car’s computer might also be defective preventing proper communication between components; thus resulting in an illuminated warning lamp on dashboard display panel indicating something needs attention from owner/mechanic right away – don’t ignore these lights!

All-in-all there is multiple possible causes as to why one’s Traction ControlLight wont switchoff but luckily most are relatively simple & inexpensive fixes once identified correctly!

Why Does My Traction Warning Light Stay On?

If your car’s traction warning light stays on, it could be a sign of several different issues. Depending on the make and model of your car, the most common causes are low tire pressure, faulty wheel speed sensors, or a malfunctioning antilock brake system (ABS). Low tire pressure can cause the wheels to slip more easily on wet roads which triggers the traction control system.

Faulty wheel speed sensors may produce inaccurate readings about how fast each wheel is rotating – this can lead to incorrect activation of the traction control system when there is no need for it. The ABS module can also fail leading to an inability for your car’s computer to accurately monitor and adjust brakes as needed in order to maintain grip and reduce slipping under certain conditions. In any case, if you notice that your traction warning light remains illuminated even after checking your tires’ air pressure levels, it is best to take it in for inspection by a qualified mechanic who will be able to diagnose and repair whatever issue is causing it.

What Causes Traction Control to Malfunction?

Traction control is a valuable tool that helps drivers maintain safe and efficient speeds on wet, icy or otherwise slippery roads. However, when traction control malfunctions it can cause serious problems for the driver. The most common cause of malfunctioning traction control is worn or damaged components in the system such as sensors, switches and solenoids.

Additionally, if there is an obstruction blocking one of these components from operating correctly then this too can lead to a malfunction. Lastly, incorrect lubrication levels or fluid contamination within the system can also result in poor performance or even failure of the traction control system.

How Do I Turn off Traction Control on My Ram?

If you own a RAM truck, one of the great features it has is traction control. This feature helps keep your vehicle stable and on track when you’re driving in slippery conditions or over uneven terrain. However, there may be times when you need to turn off this feature for certain tasks such as off-roading or using chains in icy weather.

Luckily, turning off the traction control on your RAM is quite simple and can be done with just a few steps. First, locate the TCS (traction control system) button near the center console of your vehicle. It will likely have an illuminated symbol that looks like wheels connected by arrows indicating its purpose.

Once located press and hold down this button until an indicator light appears on either side of it that reads “TCS Off”. You’ll know that it’s been successfully turned off once both lights remain lit up for about 5 seconds before automatically shutting down again after about 10 seconds if no further action is taken. Now that the TCS has been disabled, your truck should now drive more freely over difficult surfaces without any assistance from the computerized system keeping it steady during normal road conditions like wet pavement or gravel roads etc… If at any time you want to reactivate this feature simply repeat these same steps and press “TCS On” instead of “Off” until both indicators stay lit up again and confirm its activation status before resuming your driving experience safely!

How to Reset Traction Control Light Ram 1500


Ram 1500 Traction Control Light on

The traction control light on a Ram 1500 indicates that the vehicle’s Traction Control System (TCS) has been activated. This system is designed to help reduce wheel spin and improve vehicle stability in slippery conditions. If this light comes on, it is important to check your tires for proper inflation, ensure there are no obstructions blocking your wheels, and inspect the braking system for any potential problems.

You may also want to check with an experienced mechanic if you’re unsure of what could be causing the issue.

How to Turn off Abs And Traction Control Light

If the ABS and Traction Control Light on your dashboard has illuminated, it may be an indication that there is a problem with one of these important safety features. To turn off this light, you will need to reset the system by pressing and holding down the traction control switch for several seconds until the light goes out. If this does not work, then you should take your car to a trusted mechanic as soon as possible in order to identify and repair any underlying issues that are causing this warning light to illuminate.

Traction Control Light Won’T Turn off

If your traction control light won’t turn off, it could be a sign that something is wrong with your vehicle. It’s important to get the issue checked out by a qualified mechanic as soon as possible to prevent further damage and ensure the safety of you and other drivers. Diagnosis can range from something simple like resetting the light, or more complex like replacing brakes or sensors.

It’s best to have it inspected right away so that any necessary repairs can be taken care of promptly.


Resetting your Traction Control Light on a Ram 1500 is a simple process that requires no special tools. All you need to do is turn the key in the ignition, press and hold the traction control button for five seconds, and then release it. This should reset the light and put your vehicle back into working order.

Knowing how to reset this light can save you time, money, and frustration when dealing with potential issues related to your traction control system.


  • Zayn

    Zohn Zayn Smith is a seasoned automotive enthusiast with over 15 years of experience in the industry. As the Founder and Chief Editor of Truckguider, he specializes in Dodge Ram models, including the Ram 1500 and Ram 2500. His deep understanding of these trucks makes him a trusted authority on everything from performance and maintenance to towing capabilities.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *