2013 Ram 1500 Heater Core Replacement

The heater core replacement procedure on a 2013 Ram 1500 varies slightly depending on the engine type and trim level. Generally, these steps should be followed: First, disconnect the negative battery cable and then drain the cooling system. Next, remove the instrument panel to gain access to the plenum chamber where you’ll find cables connected to it that need to be removed.

Afterward, you can unscrew and detach all remaining components in order for you to take out both halves of the plenum chamber which will give access to replace heater core with new part. Finally put everything back together in reverse order of removal process and refill coolant when finished.

If you have a 2013 Ram 1500 and are noticing issues with your vehicle’s heater core, it may be time to consider replacing it. Replacing the heater core in the 2013 Ram 1500 is not an overly difficult task, but should still only be done by an experienced mechanic. Properly replacing the heater core will ensure that your truck runs properly and efficiently while keeping you warm during cold weather days.

It is also important to note that if left unchecked, a faulty heater core can cause major damage to other components of your vehicle’s engine.

2013 dodge ram 1500 heater core removal tips good luck

How Much Does It Cost to Replace a Heater Core in a 2013 Dodge Ram?

Replacing a heater core in a 2013 Dodge Ram can be quite costly, depending on the parts and labor that are required. Generally speaking, you’re looking at anywhere from $400 to $800 just for the parts alone. On top of that, labor costs will vary depending on where you take your vehicle to get it replaced.

Most shops charge an additional fee of between $100 and $200 just for labor and installation – so all in all, replacing the heater core can cost up to around $1000 or more! It’s important to shop around as prices may vary significantly from place to place. Additionally, if there is any additional damage or repairs needed while replacing the heater core then those fees should also be taken into account when budgeting for this repair job.

How Many Hours Does It Take to Replace a Heater Core?

Replacing a heater core is not an easy task and can take anywhere from 3-8 hours, depending on the make and model of your car. It requires you to remove many parts of the vehicle including the dashboard, steering column, AC evaporator housing and other related components in order to access the heater core. Once these are removed, you must then disconnect all electrical connections and vacuum lines that connect to it before finally being able to remove it.

After this is done, you will need to flush out any residual coolant left over in the system as well as clean out any dirt or debris that may have collected in there over time. Finally you can install your new heater core before putting everything back together again. All told it could easily take up upwards 8 hours just for labor alone without factoring in other additional costs like replacement parts or special tools needed for installation which could increase total cost significantly overall.

Can You Replace a Heater Core Yourself?

Replacing a heater core yourself can be an intimidating task, but with the right tools and some patience it is possible. The most important thing to remember when replacing a heater core is safety. Make sure that you turn off your car’s engine, disconnect the battery and allow time for the system to cool down before beginning work so that you don’t burn yourself on hot components or get sprayed with coolant.

You will then need to remove the dash panel around your vehicle’s heater housing in order to access the old core. After removing all of the necessary components from your vehicle (including hoses, screws, and clips), you’ll need to carefully disassemble the old unit and replace it with a new one. Once everything has been re-connected properly, refill your system with fresh antifreeze/coolant mix according to manufacturer specifications before starting up your car again.

Replacing a heater core yourself isn’t something for everyone; however if you research correctly and prepare ahead of time there’s no reason why you shouldn’t be able to tackle this job successfully!

Why is My 2013 Dodge Ram Heater Not Hot?

If you own a 2013 Dodge Ram, then you may have noticed that your vehicle’s heater isn’t producing hot air. This can be an issue during the cold winter months, when you need to keep warm while driving. The source of this problem could range from the thermostat to the coolant level or even something more complex such as a blocked cabin filter.

Before spending time and money on repairs, it is important to understand why your 2013 Dodge Ram’s heater isn’t hot in order to find out what needs fixing or replacing. One of the most common causes for a lack of heat is low coolant levels; if there’s not enough antifreeze circulating through your engine block then it won’t be able to produce heated air. A faulty thermostat can also contribute to the problem – by failing to open and allow coolant passage into the engine, causing temperatures inside your car’s heating system not reach their peak temperature.

Other potential issues include clogged radiator hoses or leaking water pumps which should be inspected regularly for signs of wear and tear. Lastly, if none of these solutions work then it may be necessary replace any faulty components such as cabin filters or blower motors in order for your 2013 Dodge Ram’s heater get back up and running again!

2013 Ram 1500 Heater Core Replacement

Credit: www.ramforum.com

2013 Ram 1500 Heater Core Problems

The 2013 Ram 1500 is known to have some issues with the heater core. Symptoms of a failing heater core include a sweet smell from the air vents and the inability to produce hot air when the heat is turned on. If these symptoms are present, it’s important to take your car in for service as soon possible so that further damage can be avoided.

2013 Dodge Ram 1500 Heater Core Location

The heater core in the 2013 Dodge Ram 1500 is located behind the glove box. It is sealed off from the passenger compartment, and can only be accessed by removing a few panels and screws. The exact location of this part depends on whether it has air conditioning or not; if it does have air conditioning, then the heater core can be found beneath the dash assembly on the driver’s side of the vehicle.

If your Ram does not have an A/C system installed, you will find it just to left of where your feet would rest while driving.

2013 Ram 1500 Heater Core Leak

If you have a 2013 Ram 1500 and are noticing an odd smell coming from the vents or, worse yet,are seeing puddles of coolant on your garage floor, you may have a heater core leak. The most common cause for these leaks is due to corrosion or damage to the heater core itself. If your vehicle is leaking coolant, it’s important to get it checked out by a professional as soon as possible; otherwise, further problems with your engine could arise.


In conclusion, replacing the heater core in a 2013 Ram 1500 can be an involved process. It requires patience and attention to detail as you take apart the dashboard and interior of your truck. While there are some risks associated with performing such a task on your own, it is possible to complete this repair without taking it to a professional mechanic.

With the right tools and instruction, you can save yourself time and money by replacing the heater core in your 2013 Ram 1500 yourself.


  • Zayn

    Zohn Zayn Smith is a seasoned automotive enthusiast with over 15 years of experience in the industry. As the Founder and Chief Editor of Truckguider, he specializes in Dodge Ram models, including the Ram 1500 and Ram 2500. His deep understanding of these trucks makes him a trusted authority on everything from performance and maintenance to towing capabilities.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *