4.7 to 5.7 Hemi Swap Kit

Looking to convert your Chrysler 300, Dodge Challenger, or Dodge Charger from a V6 to a V8? Look no further than the 4.7 to 5.7 Hemi Swap Kit! This kit includes everything you need to make the swap, including a new engine block, cylinder heads, pistons, rings, rods, bearings, oil pump, timing chain set, and gaskets.

You’ll also get a new ECU and wiring harness specifically for this swap.

If you’re looking to swap out your old Hemi engine for a newer model, there are a few things you’ll need to do first. Luckily, there are plenty of kits available that will make the process a whole lot easier. Here’s what you need to know about swapping out your Hemi engine.

The first thing you’ll need to do is find a compatible engine. The new 5.7 Hemi engines will work with most older 4.7 models, so that’s a good place to start your search. Once you’ve found a compatible engine, the next step is to purchase a swap kit.

There are many different types of swap kits available, but they all essentially do the same thing – they allow you to bolt the new engine into place of the old one. Most kits come with all of the necessary hardware and instructions, so it’s just a matter of following along and doing the work. Once the new engine is in place, you’ll need to reconnect all of the wiring and plumbing.

This part can be tricky, so it’s important to follow the instructions carefully or get some help from someone who knows what they’re doing. Finally, once everything is hooked up and ready to go, it’s time to start her up and enjoy your newly swapped Hemi engine!

4.7 to 5.7 engine swap what you need

Dodge Dakota 4.7 to 5.7 Hemi Swap Kit

Dodge Dakota 4.7 to 5.7 Hemi Swap Kit The Dodge Dakota is a great truck, but it could be even better with a Hemi engine swap. Luckily, there are kits available that make this swap possible.

Here’s everything you need to know about the Dodge Dakota 4.7 to 5.7 Hemi swap kit. What Is a Hemi Engine? A Hemi engine is a type of V8 engine that has hemispherical combustion chambers.

This design allows for more efficient combustion and more power than a traditional V8 engine. Why Would I Want to Swap My Dakota’s Engine? There are several reasons why you might want to consider swapping out your Dakota’s 4.7L engine for a 5.7L Hemi engine.

The most obvious reason is increased power and performance. With a Hemi engine, your Dakota will have significantly more horsepower and torque, making it faster and more capable off-road. Additionally, the improved combustion efficiency of the Hemi engine can result in better fuel economy.

And finally, who doesn’t love the sound of a powerful V8 under the hood? Whether you’re looking for increased performance or just want to add some extra rumble to your ride, swapping in a Hemi engine is sure to turn heads wherever you go!

Dodge Engine Swap Compatibility Chart

Dodge Engine Swap Compatibility Chart If you are looking to swap out the engine in your Dodge vehicle, you may be wondering what other engines are compatible with your car. Here is a compatibility chart to help you find the right engine for your Dodge:

Engine Model: 3.6L Pentastar V6 Compatible With: Chrysler 200, Chrysler 300, Challenger, Charger, Dart, Durango, Grand Caravan, Journey, Jeep Cherokee & Wrangler Engine Model: 5.7L Hemi V8

Compatible With: Challenger, Charger Engine Model: 6.4L SRT Hemi V8 Compatible With: Challenger

4Th Gen Ram 4.7 to 5.7 Swap

If you own a fourth generation Ram truck with a 4.7 liter engine, you may be considering a swap to the 5.7 liter engine. There are many reasons why this may be a good idea for you and your truck. The first reason is that the 5.7 liter engine is more powerful than the 4.7 liter engine.

It has more torque and horsepower, which means that it can tow more weight and haul heavier loads. The 5.7 also gets better gas mileage than the 4.7, so you’ll save money on fuel costs in the long run. Another reason to consider this swap is that the 5.7liter engine is easier to find parts for and there are more aftermarket options available for it.

4.7 to 5.7 Hemi Swap Dakota

If you’re looking to swap out your old engine for a new Hemi, the Dakota is a great option. The 4.7 to 5.7 Hemi Swap Dakota kit comes with everything you need to make the swap, including a new engine block, heads, intake manifold, and more. This swap will give your Dakota a whole new lease on life, and it’s a great way to increase its performance and power.

4.7 to 5.7 Hemi Swap Kit

Credit: jeepspecs.com

Will a 5.2 Bolt Up to a 4.7 Transmission?

There are a few things to consider when determining whether or not a 5.2 bolt up to a 4.7 transmission. The first is the type of transmission. There are two types of transmissions, automatic and manual.

If the transmission is an automatic, then the answer is yes, a 5.2 will bolt up to a 4.7 transmission. However, if the transmission is a manual, then the answer is no, a 5.2 will not bolt up to a 4.7 transmission because the bell housing pattern is different between the two engines. The second thing to consider is what year model the engine and transmission are from.

The reason this matters is because in 1998, Dodge switched from using an older style engine block to what they called the “Magnum” engine block for their V8 engines (which included both the 5.2 and 4.7). This new engine block had a different bell housing pattern than the older style engine blocks, so if you have a 1998 or newer Magnum engine with a manual transmission, it will not bolt up to an older style engine with an automatic transmission (and vice versa).

Is Dodge 4.7 a 318?

The Dodge 4.7 engine is not a 318. It is a newer, more powerful engine that was first introduced in the Dakota pickup truck in 2003. The 4.7 engine replaced the older 3.9 engine and was available in both two-wheel drive and four-wheel drive models.

The 4.7 engine was also used in the Durango SUV, which replaced the Dakota in 2004.

Can a Hemi Fit in a Dakota?

The short answer is that yes, a Hemi can fit in a Dakota. However, there are some things you need to know before attempting this swap. First, the Dakota and Hemi share a common engine block size.

This means that the engine bay of the Dakota should have no problem accommodating the larger Hemi engine. However, you will need to make sure that the transmission mount is compatible with the Hemi. Additionally, the radiator and cooling system will need to be upgraded to properly cool the larger engine.

Second, while the Hemi will physically fit into the Dakota, there may be some clearance issues with certain components. For example, the exhaust headers may need to be modified or replaced in order to clear the frame rails. You will also need to ensure that all of your electrical and fuel lines are long enough to reach their respective destinations on the Hemi engine.

Overall, swapping a Hemi into a Dakota is certainly possible. However, it is not a bolt-in affair and will require some modifications and careful planning before undertaking this project.

What Transmission Fits a 5.7 Hemi?

There are a few different types of transmissions that can be used with a 5.7 Hemi engine. The most popular options are the 4-speed automatic and the 6-speed manual. There are also a few aftermarket options that can be used, but these will typically require some modification to fit properly.


Looking to swap out your 4.7 or 5.7 Hemi engine? There’s a kit for that! This blog post details a step-by-step guide on how to do just that, complete with pictures and helpful links.

Whether you’re looking for more power or better fuel economy, this guide will help you make the swap with ease.

See More:


  • MoparProud

    MoparProud brings a rich background in automotive mechanics to the Truckguider team. With over 20 years of hands-on experience, he is an expert in engine mechanics, particularly the 5.7 Hemi and 6.7 Cummins engines. His insights have also made valuable contributions to forums like Cummins Forum, solidifying his reputation in the automotive community.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *