99 Dodge Ram Transmission Shifting Problems

If you own a 99 Dodge Ram, you may have experienced some shifting problems with the transmission. The good news is that there are some things you can do to fix the problem. First, check the fluid level in the transmission.

If it’s low, add more fluid. You may also need to adjust the shift cable.

If you’re having shifting problems with your 99 Dodge Ram, you’re not alone. Many drivers have reported issues with their transmission, specifically when shifting from first to second gear. There are a few possible causes of this problem, and luckily there are also a few potential solutions.

One possible cause of your shifting problems could be a faulty shift solenoid. The shift solenoid is responsible for controlling the flow of fluid to the transmission, and if it’s not working properly, it can cause the transmission to slip or refuse to shift gears. If you think this might be the case, take your truck to a qualified mechanic who can test the shift solenoid and replace it if necessary.

Another potential cause of your shifting problems is low transmission fluid levels. If there’s not enough fluid in the system, it can cause the gears to slip or fail to engage properly. Again, this is an issue that should be addressed by a qualified mechanic who can check your fluid levels and top off the system if necessary.

Finally, worn-out engine mounts could also be causing your shifting problems. Engine mounts keep the engine securely in place, and if they’re worn out or damaged, they can allow the engine to move around too much during driving. This movement can then put stress on the transmission and cause it to slip or fail to shift gears properly.

Replacing worn-out engine mounts is something best left to a professional mechanic as well.

99 Dodge Ram Transmission Shifting Problems

Credit: www.dieseltruckresource.com

How Do You Reset the Transmission Control Module on a Dodge Ram?

If you’re looking to reset the transmission control module on your Dodge Ram, there are a few things you’ll need to do. First, you’ll need to disconnect the battery. Next, locate the TCM (transmission control module) and remove it.

Finally, reinstall the TCM and reconnect the battery. Once everything is back in place, your Dodge Ram should be good to go!

How Do You Fix Shifting Problems?

If your car is having shifting problems, there are a few things you can do to try and fix the issue. First, check the transmission fluid level and add more if it is low. You should also check the condition of the transmission fluid itself and replace it if it looks dirty or burnt.

If those two things don’t solve the problem, then you may need to take your car to a mechanic for further diagnosis.

What Year Did Ram Have Transmission Problems?

Ram has had transmission problems in the past, specifically in the years 2001 and 2002. In 2001, there were reports of stalling and hesitating, while in 2002 there were reports of transmissions slipping and failing altogether. Ram addressed these issues by making a number of changes to their transmission design, which seem to have solved the problem for the most part.

What Causes Dodge Transmission Problems?

Dodge transmissions are built to last, but like any other car part, they can eventually run into problems. The most common cause of Dodge transmission problems is simply wear and tear. Over time, the gears in your transmission can become worn down, making it harder for your car to shift gears properly.

In some cases, transmission fluid leaks can also lead to transmission problems. If your car is leaking transmission fluid, it’s important to get it fixed as soon as possible to avoid further damage. Another common cause of Dodge transmission problems is a faulty torque converter.

The torque converter is responsible for converting the engine’s rotational force into hydraulic pressure, which is then used to power the transmission. If the torque converter isn’t working properly, it can cause your car to have trouble shifting gears or even prevent it from shifting altogether. If you’re experiencing Dodge transmission problems, the best thing to do is take your car to a qualified mechanic for diagnosis and repair.

Trying to fix the problem yourself could end up doing more harm than good, so it’s always best to leave it in the hands of someone who knows what they’re doing.

Dodge RAM 1500 Transmission Shifting Problem Caused by Defective Pressure/Overdrive Solenoid.

99 Dodge Ram 2500 Shifting Problems

If you own a 1999 Dodge Ram 2500, you may have experienced shifting problems. This is a common problem with this model truck. There are several things that can cause the shifting problems.

The most common cause is the transmission fluid level. If the fluid level is low, it can cause the transmission to slip and not shift correctly. Another common cause is a clogged filter.

A clogged filter can also cause the transmission to slip and not shift correctly. The third most common cause is a bad solenoid. A bad solenoid can also cause the transmission to slip and not shift correctly.

If you are experiencing shifting problems, it is best to take your truck to a qualified mechanic for diagnosis and repair.

1999 Dodge Ram 1500 Shift Solenoid

If your 1999 Dodge Ram 1500 is having shifting problems, it could be due to a faulty shift solenoid. The shift solenoids are responsible for controlling the transmission’s gear shifts. If one of the solenoids is not working properly, it can cause the transmission to slip or not shift gears at all.

There are two types of shift solenoids: the upshift solenoid and the downshift solenoid. The upshift solenoid controls the movement of the transmission’s gears from 1st to 2nd gear, while the downshift solenoid does the opposite, controlling the movement from 2nd to 1st gear. If either of these two types of shift solenoids fails, it can cause serious shifting problems.

If you suspect that your Ram 1500’s shifting problems are due to a faulty shift solenoid, there are a few ways to test them. First, you can check for codes using a code reader or scanner. If any codes relating to shift solenoids come up, that’s a good indication that one or more of them is failing.

You can also manually check each shift solenoid by disconnecting the electrical connector and testing for continuity with a multimeter. If there is no continuity, then that particular shift solenoide needs to be replaced. Replacing a failed shift so lenoide is relatively simple and can be done with just basic hand tools in most cases.

Just remove the old so lenoide (it will be located near where the shifter cable attaches to the transmission) and install a new one in its place – easy peasy!

1999 Dodge Ram 1500 Shift Linkage Adjustment

If you own a 1999 Dodge Ram 1500, you may have noticed that the shift linkage is starting to feel loose. This is a common problem with these trucks and it’s actually quite easy to fix. By adjusting the shift linkage, you can tighten it up and make your truck feel like new again.

Here’s how to adjust the shift linkage on your 1999 Dodge Ram 1500: 1. Park your truck in a safe place and set the parking brake. 2. Locate the two nuts that hold the shifter cable bracket to the transmission case.

These nuts are located on either side of the case, just behind the shifter knob. 3. Use a wrench to loosen these nuts, but do not remove them completely. 4. With the nuts still partially tightened, use your hand to push or pull on the shifter cable bracket until you achieve the desired adjustment.

You want there to be some resistance when shifting between gears, but not so much that it feels difficult or uncomfortable. 5 Once you’re happy with the adjustment, fully tighten both nuts and test out your shifter. It should now feel tight and precise when shifting gears!

1999 Dodge Ram 2500 V10 Transmission Problems

If you’re a Dodge Ram owner, you may have experienced problems with your truck’s transmission. In fact, the 1999 Dodge Ram 2500 was one of the most recalled trucks due to transmission issues. Most of the problems stemmed from the truck’s V10 engine.

The engine would often overheat, which caused damage to the transmission. As a result, many owners had to replace their transmissions entirely. If you’re experiencing transmission problems with your Dodge Ram, it’s important to take it to a reputable mechanic or dealership for repairs.

Ignoring the problem will only make it worse and could eventually lead to complete engine failure.

Conclusion

The 1999 Dodge Ram 1500 is a great truck, but many drivers have reported transmission problems. These problems range from shifting issues to complete failure of the transmission. In most cases, these problems can be traced back to a faulty solenoid pack.

Replacing the solenoid pack will usually fix the problem.

Author

  • Zayn

    Zohn Zayn Smith is a seasoned automotive enthusiast with over 15 years of experience in the industry. As the Founder and Chief Editor of Truckguider, he specializes in Dodge Ram models, including the Ram 1500 and Ram 2500. His deep understanding of these trucks makes him a trusted authority on everything from performance and maintenance to towing capabilities.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *