2017 Ram 1500 Wheel Torque Specs

The 2017 Ram 1500 wheel torque specs are as follows: lug nuts – 100 lb-ft (135 Nm); rear axle nut – 200 lb-ft (271 Nm); front hub bearing – 160 lb-ft (217 Nm). It is important to tighten the lug nuts in a star pattern, going from left to right or vice versa. Make sure all of the lug nuts are tightened to the same specification as well.

The rear axle nut should be torqued with an impact wrench and then verified with a torque wrench. Finally, make sure that you check your owner’s manual for any additional details regarding tightening specifications specific to your vehicle make and model.

The 2017 Ram 1500 comes with a variety of wheel torque specs depending on the model. Depending on which trim you select, the maximum recommended torque ranges from 100 to 140 ft-lbs. It is important to follow these guidelines when performing maintenance or installing new wheels as exceeding the recommended specs could result in damage to your vehicle’s suspension and steering systems.

Car wheels torque specs for most makes and models

What is the Torque for a 2017 Dodge Ram?

The torque for a 2017 Dodge Ram is quite impressive, with the 5.7-liter Hemi engine producing up to 410 lb-ft of torque at 3,600 rpm. This amount of torque is more than enough to get the job done whether you’re hauling large loads or just cruising on the highway. The engine also provides plenty of power and acceleration when needed, making it an ideal vehicle for both light-duty and heavy-duty jobs alike.

Additionally, this engine is designed to run efficiently so you’ll have less wear and tear on your truck in the long run as well as saving money at the pump due to its fuel economy ratings that range from 17 mpg city/25 mpg highway (4×2) all the way up to 15 mpg city/22 mpg highway (4×4). All in all, if you’re looking for a powerful truck that can handle any task thrown its way while still being efficient and reliable then look no further than a 2017 Dodge Ram.

What is the Torque Spec on the Axle Nut of a 2017 Dodge Ram 1500?

The torque spec on the axle nut of a 2017 Dodge Ram 1500 is 150 ft-lbs. It is important to make sure that your axle nut is properly torqued in order to prevent any issues with your truck such as vibration, noise, or other axial problems. To do so, you will need a quality torque wrench that can accurately measure the amount of force being applied to the axle nut.

After applying lubrication to the threads and seating surface of the axle nut, use an appropriate size socket and attach it firmly onto the end of your torque wrench. Then turn it counterclockwise until you reach 150 ft-lbs specifically for this particular model truck year which is 2017 Dodge Ram 1500’s required torque spec. Always double check your work after completing this task by using both hands to verify if there are no more adjustments needed (and if necessary repeat).

This procedure should be performed regularly during regular maintenance checks in order to ensure proper functioning and performance from your vehicle!

What Torque Should Lug Nuts Be Tightened To?

When it comes to tightening lug nuts, the amount of torque you should use is critical. Properly tightened lug nuts are essential for keeping your vehicle’s wheels securely attached and preventing accidents due to loosened or detached wheels. The amount of torque required to properly secure a wheel depends on the type of car, as well as the size and material of the lug nut.

Generally speaking, automotive experts recommend that most cars have their lug nuts tightened to between 90-100 ft/lbs (foot pounds) for steel wheels and between 70-90 ft/lbs for aluminum alloy wheels. It’s always best practice to check your manufacturer’s user manual or ask an auto technician what torque specification your car requires before attempting any repairs yourself. Remember, if you don’t tighten them enough they can come loose while driving; but if you over-tighten them too much they can strip out when removing them in the future–so take care when using a torque wrench!

What is the Torque Spec for a 2016 Dodge Ram?

The 2016 Dodge Ram is equipped with a 5.7L V8 engine and has a torque spec of 410 lb-ft at 3900 rpm. This impressive power output makes it one of the most powerful vehicles in its class, allowing it to tow up to 10,410 lbs when properly equipped. It also comes with an 8-speed automatic transmission that helps optimize fuel economy while keeping you in control on the road.

When changing any components related to your vehicle’s drivetrain, such as brakes or shock absorbers, make sure you use the correct torque specs for all nuts and bolts according to manufacturer guidelines – for complete peace of mind. The proper torque spec for the 2016 Dodge Ram is 120 ft/lbs (165 Nm) on wheel lug nuts; 118 ft/lbs (160 Nm) on axle shaft flange bolts; 140 ft/lbs (190 Nm) on bearing cap bolt; and 178 ft/lbs (240 Nm) on differential cover bolts – always following recommended tightening procedures from your owner’s manual!

2017 Ram 1500 Wheel Torque Specs

Credit: tighttorque.com

Ram 1500 Lug Nut Torque Specs

The Ram 1500 is a reliable and powerful truck, but it’s important to make sure the lug nuts are properly torqued for optimal performance. The torque specification for the lug nuts on a Ram 1500 is 100 ft-lbs. It’s always best practice to check your owner’s manual or contact an experienced mechanic to be sure you have the correct information.

2017 Ram 1500 Torque Specs

The 2017 Ram 1500 offers a powerful performance with its 5.7-liter V8 engine, which produces 395 horsepower and 410 lb.-ft. of torque.

This engine is paired with an 8-speed automatic transmission, giving the truck a smooth ride while allowing it to tow up to 10,620 lbs., making this one of the best pickup trucks on the market for those who need serious hauling power.

2019 Ram 1500 Wheel Torque Specs

The 2019 Ram 1500 is equipped with a 5-lug wheel pattern, and its torque specs are 108 ft/lbs for both the front and rear wheels. This model also comes with 18″ or 20″ aluminum alloy rims, which require lug nuts to be tightened to 80 ft/lbs of torque. It is important that these specifications are followed closely when replacing or tightening the wheels on your Ram 1500 to ensure optimal performance and safety.


This blog post has provided an overview of the 2017 Ram 1500 wheel torque specs. It’s important to note that the correct torque specification for your vehicle may be different than what is listed here, so it’s always best to consult with a certified technician before performing any repairs or maintenance on your vehicle. Taking these precautions will help ensure that you get the most out of your truck and keep it running safely and efficiently for years to come.


  • Zayn

    Zohn Zayn Smith is a seasoned automotive enthusiast with over 15 years of experience in the industry. As the Founder and Chief Editor of Truckguider, he specializes in Dodge Ram models, including the Ram 1500 and Ram 2500. His deep understanding of these trucks makes him a trusted authority on everything from performance and maintenance to towing capabilities.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *