Where is Cylinder 5 on a 5.7 Hemi Location

The 5.7L Hemi engine is a V8 engine, which means it has eight cylinders arranged in a “V” shape with four cylinders on each bank. 

The angle between the two banks of cylinders is typically 90 degrees. The cylinder heads feature hemispherical combustion chambers, giving the engine its “Hemi” designation.

Cylinder 5 in a 5.7L Hemi V8 engine is located on the driver’s side (left side) of the engine. This engine has a total of 8 cylinders, with 4 on the driver’s side and 4 on the passenger’s side.

Here’s the layout for the 5.7L Hemi V8 engine:

Driver’s side (left): 1-3-5-7 Passenger’s side (right): 2-4-6-8

Cylinder 5 is the third cylinder from the front on the driver’s side, following cylinders 1 and 3. In a 5.7L Hemi engine, each cylinder has two valves for intake and two valves for exhaust, making a total of 16 valves for the entire engine.

Cylinder 5, like the other cylinders, has a hemispherical combustion chamber that provides improved combustion efficiency, increased airflow, and better overall performance. This design allows for larger valves and a more direct path for air to enter the combustion chamber, leading to the engine’s well-known power and performance.

To access cylinder 5 in a 5.7L Hemi engine, you would need to remove the ignition coil, spark plug, and potentially the fuel injector, depending on what work you are planning to do on the cylinder. Always consult your vehicle’s repair manual for specific procedures and safety precautions.

5.7 hemi cylinder 5 location Table

The cylinder numbering for the 5.7L Hemi engine

Driver’s side bank (left bank when facing the engine from the front of the vehicle):

1. Cylinder #1 – Located at the front-most part of the driver’s side bank.
2. Cylinder #3 – Located behind Cylinder #1 on the driver’s side bank.
3. Cylinder #5 – Located behind Cylinder #3 on the driver’s side bank.
4. Cylinder #7 – Located at the rear-most part of the driver’s side bank.

Passenger’s side bank (right bank when facing the engine from the front of the vehicle):

1. Cylinder #2 – Located at the front-most part of the passenger’s side bank.
2. Cylinder #4 – Located behind Cylinder #2 on the passenger’s side bank.
3. Cylinder #6 – Located behind Cylinder #4 on the passenger’s side bank.
4. Cylinder #8 – Located at the rear-most part of the passenger’s side bank.

Cylinder #5, which you are looking for, is on the driver’s side bank (left side when facing the engine from the front of the vehicle). 

It is the third cylinder from the front of the engine, positioned behind Cylinder #3 and in front of Cylinder #7. To access Cylinder #5, 

you may need to remove any surrounding components or covers that may be obstructing access, such as the air intake, engine cover, or other engine accessories. 

Always consult your vehicle’s service manual for detailed instructions and follow proper safety precautions when working on your engine.

RAM 5.7 HEMI Tick noise, Check Engine light on, cylinder 5

How to Troubleshooting for Cylinder 5 On a 5.7 Hemi

Troubleshooting for Cylinder 5 on a 5.7L Hemi engine involves several steps to diagnose and address any potential issues. Follow these steps to properly troubleshoot:

Verify cylinder location:

Ensure you have located cylinder 5 correctly. In a 5.7L Hemi engine, cylinder 5 is on the driver’s side bank (left side when facing the engine from the front), and it is the third cylinder from the front.

Check for Diagnostic Trouble Codes (DTCs):

Use an OBD-II scanner to check for any stored DTCs related to cylinder 5. These codes can help pinpoint issues such as misfires, fuel delivery problems, or sensor malfunctions.

Visual inspection:

Inspect cylinder 5 and the surrounding area for any signs of damage, leaks, or loose connections. This includes checking spark plug wires, coil packs, and fuel injectors.

Inspect the spark plug:

Remove the spark plug from cylinder 5 and examine it for signs of fouling, damage, or excessive wear. If necessary, replace the spark plug with a new one, ensuring it’s properly gapped and torqued.

Test the ignition coil:

Check the ignition coil for cylinder 5 by swapping it with a coil from another cylinder. If the misfire or issue follows the coil, replace it with a new one.

Inspect fuel injectors:

Examine the fuel injector for cylinder 5, ensuring it is properly connected and free of damage. You can swap the injector with one from another cylinder to see if the issue follows the injector. If it does, replace the faulty injector.

Perform a compression test:

A compression test can help identify any potential issues with the cylinder’s compression, indicating problems with valves, piston rings, or the cylinder head. Compare the compression reading for cylinder 5 to the other cylinders. If the reading is significantly lower, further inspection and repairs may be necessary.

Examine the exhaust system:

Check for any leaks, blockages, or damage in the exhaust system that could be affecting the performance of cylinder 5.

Consult a professional:

If you have followed the above troubleshooting steps and the issue with cylinder 5 persists, it may be time to consult a professional mechanic for further diagnosis and repairs.

Always remember to consult your vehicle’s service manual for specific guidelines and follow safety precautions when working on your engine.

6.4 hemi cylinder numbers

The 6.4 Hemi engine, also known as the 392 cubic-inch engine, is a V8 engine configuration produced by Chrysler. The engine consists of 8 cylinders, with 4 on each side or bank. These banks are arranged in a “V” shape, which gives the engine its name. 

The cylinders are numbered from the front of the engine to the rear, with odd-numbered cylinders on the left (driver) side bank and even-numbered cylinders on the right (passenger) side bank.

5.7L Hemi engine generations, models

Credit: www.hemmings.com

FAQs:

Hemi 5.7 P0305 Cylinder 5 Misfire – Dead Cam/Lifter

Conclusion

In conclusion, locating cylinder 5 on a 5.7L Hemi engine is a straightforward process. The engine features a V8 configuration with two banks, each containing four cylinders. Cylinder 5 is found on the driver’s side bank (left side when facing the engine from the front), positioned as the third cylinder from the front. 

By referring to the provided table and FAQs, you can better understand the cylinder arrangement and confidently locate cylinder 5 on your 5.7L Hemi engine. Remember to consult your vehicle’s service manual and follow safety precautions when working on your engine.

Read Also:

• 2018 Ram 2500 Abs Module Location
• 2018 Ram 2500 Abs And Traction Control Light
• 2016 Ram 2500 Heater Core Replacement
• 2012 Ram 2500 Remote Start Disabled
• 2012 Ram 2500 Oil Capacity
• What Years are the 5.7 Hemi Interchangeable
• 2018 Ram 2500 Radio Issues