How to Reset Ram Park Assist Sensor

To reset the Ram Park Assist Sensor, start by turning off the vehicle and opening the hood. Then locate and disconnect both battery cables from the battery terminals, making sure to take note of which cable was connected to each terminal so that you can reconnect them correctly. Once disconnected, wait at least two minutes before connecting them back up in their original positions.

After this is done, close the hood and restart your vehicle; this should reset your park assist sensor. If it does not work then inspect all connections for loose wires or corrosion and clean any dirt or debris away from connectors using a mild cleaning agent like rubbing alcohol on a rag or cotton swab.

  • Locate the Ram Park Assist Sensor: The park assist sensor is located in the rear bumper of your vehicle
  • You may need to use a flashlight or other lighting source to be able to see it clearly
  • Disconnect the Battery: To reset the park assist sensor, you will need to disconnect the battery from the car for at least five minutes so that all power is removed from the system
  • Reconnect Battery and Turn on Vehicle: After five minutes have passed, reconnect the battery and turn on your vehicle
  • This allows power to be restored back into your system and should reset any errors associated with your park assist sensor system
  • Verify Reset Was Successful: Once you’ve reconnected everything, start up your car again and give it a test drive around town or in an empty parking lot if possible (so as not to disturb anyone else)
  • If successful, you should notice that when approaching objects such as curbs or walls, there are no more issues with false alarms sounding off indicating that a potential collision might occur even though nothing was present in front of you at all!

Dodge Ram Park Assist System Failure – Sensor Replacement

How Do I Reset My Parking Sensor?

If you’ve ever been in the situation of having your parking sensor not working, you know how frustrating it can be. Fortunately, resetting a parking sensor is relatively simple and easy to do. First, locate the OBD-II port in your car.

This is usually located somewhere near the dashboard on the driver’s side of the vehicle. Then connect an OBD-II reader to that port and read all available codes from it. You should then look for any trouble codes related to your parking sensors such as PDC Fault or Parking Sensor Malfunctioning Code etc., If you find any such code, this indicates that there may be an issue with one or more components of your car’s parking system which needs to be addressed before attempting a reset procedure for it.

Once any existing issues have been identified and fixed, simply disconnect the OBD-II reader and turn off your car’s engine for at least 5 minutes before restarting it again. Finally, start up your car once more and press firmly on its brake pedal while simultaneously pressing down on its accelerator – this will help re-calibrate all of its sensors so they can function properly once again!

How Do You Reset the Service Park Assist?

If you own a car with Park Assist, resetting the system is relatively simple. First, locate the service park assist button on your dashboard and press it firmly to activate the system. If you have an older model vehicle, this may require turning off the ignition first before pressing the button.

Once activated, open each of your car’s doors and wait for about 30 seconds for all systems to reset themselves automatically. Then close all doors again and turn on the engine if necessary. Now your Park Assist should be fully operational once more – ready to help you find that perfect parking spot!

What Does It Mean When It Says Service Park Assist?

When a car is equipped with park assist, it means that the vehicle has been outfitted with an advanced technology that helps drivers to safely and efficiently maneuver their vehicles into parking spots. This system uses sensors located around the car to detect nearby objects and then provides guidance for steering, accelerating, and braking in order to properly place the vehicle in a designated spot. It also assists with parallel parking maneuvers by detecting available spaces and suggesting appropriate angles of entry.

Park assist can be found on many high-end cars or as an aftermarket add-on but its primary purpose remains the same: To make it easier for you to find a spot when you’re driving in crowded areas or navigating tight corners.

Do You Have to Reprogram Parking Sensors?

Parking sensors are a great way to ensure you don’t hit anything when parking your car. However, do you really have to reprogram them every time you park? The answer is no, not necessarily.

Most modern parking sensors come with built-in algorithms that allow them to reset automatically after each use. This means that all you need to do is position your vehicle in the right spot, and the sensors will detect any obstacles around it without needing any additional programming. Some advanced systems even adjust their sensitivity depending on the size of your car so they can provide maximum protection while still being unobtrusive.

So if you’re wondering whether or not you have to reprogram parking sensors every time, chances are that the answer is no – in most cases they’ll take care of themselves!

How to Reset Ram Park Assist Sensor


Dodge Ram Park Assist Not Working

If your Dodge Ram is equipped with Park Assist, but it’s not working properly, there are a few potential causes. It could be due to a faulty wiring harness, an issue with the sensors or actuators, or a software-related problem. If you’re having trouble diagnosing the problem yourself, take your vehicle to a qualified mechanic for assistance.

Dodge Ram Service Parksense Sensors

The ParkSense sensors of the Dodge Ram are designed to help drivers park their vehicles safely and accurately. The advanced technology monitors the area around the vehicle, providing alerts when it detects an object in close proximity. This helps to prevent any potential damages that may occur when backing up into a tight spot.

Additionally, these sensors can be adjusted for sensitivity and range depending on the driver’s preference and needs, making them incredibly customizable for each individual user.

Ram 1500 Parking Sensor Fuse Location

The parking sensor fuse for the Ram 1500 is located in the Integrated Power Module (IPM) under the hood. The IPM contains fuses and relays that provide power to various components throughout your vehicle, including the parking sensors. It’s important to note that you should never attempt to repair or replace a fuse without consulting an experienced mechanic, as incorrect wiring can cause serious damage to your vehicle.


In conclusion, resetting your Ram’s park assist sensor is a simple and straightforward process that requires few tools. While the exact steps may vary depending on the year, make, and model of your vehicle, it should generally only take 10-20 minutes to complete. With clear instructions and some basic knowledge of car mechanics, you can easily reset this system without having to visit a mechanic or garage—saving time and money in the long run.


  • Zayn

    Zohn Zayn Smith is a seasoned automotive enthusiast with over 15 years of experience in the industry. As the Founder and Chief Editor of Truckguider, he specializes in Dodge Ram models, including the Ram 1500 and Ram 2500. His deep understanding of these trucks makes him a trusted authority on everything from performance and maintenance to towing capabilities.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *