Ram Transmission Identification Chart by Engine, Year and Sales Code
A Ram transmission identification chart starts with engine and year: the 2019 to 2026 Ram 1500 3.6L Pentastar uses the 850RE 8-speed, 5.7L Hemi and 3.0L Hurricane trucks use the 8HP75, and 2025 to 2027 Ram 2500 and 3500 Cummins trucks use the ZF TorqueFlite HD.
Older heavy-duty trucks used six-speed units: the 66RFE behind the Hemi, the 68RFE behind most Cummins engines and the Aisin AS69RC mainly behind the 3500 high-output Cummins.
This chart pairs each unit with the engine and the model years that Ram documents and Stellantis service bulletins confirm, plus the sales codes those bulletins use. You will also find gear ratios that separate the 68RFE from the Aisin and a 4-step way to confirm your own truck.
Ram 1500 Transmission Chart for 2014 to 2026 Trucks
The Ram 1500 moved to eight-speed automatics during the 2013 to 2018 DS generation. Since the 2019 DT redesign, every Ram 1500 automatic in the Stellantis documents we checked is an eight-speed.
Ram’s 2014 Ram 1500 specification sheet, Stellantis bulletins and Ram’s 2026 Ram 1500 release give these pairings:
| Years | Engine | Transmission | Sales Code |
|---|---|---|---|
| 2014 | 3.6L Pentastar V6 | ZF 8HP45 8-speed | Not listed |
| 2014 | 3.0L EcoDiesel V6 | ZF 8HP45 8-speed | Not listed |
| 2014 | 5.7L Hemi V8 | 65RFE 6-speed or ZF 8HP70 8-speed | Not listed |
| 2016 | 3.6L Pentastar V6 | 845RE 8-speed | DFL or DFK |
| 2016 | 3.0L EcoDiesel V6 | 8HP70 8-speed | DFD or DFK |
| 2016 | 5.7L Hemi V8 | 8HP70 8-speed | DFD or DFK |
| 2019 to 2025 | 3.6L Pentastar V6 eTorque | 850RE 8-speed | DFT |
| 2020 to 2023 | 5.7L Hemi V8 | 8HP75 8-speed | DFR |
| 2026 | 5.7L Hemi V8 eTorque | 8HP75 8-speed | Not listed |
| 2026 | 3.0L Hurricane SO or HO I6 | 8HP75 8-speed | Not listed |
Stellantis bulletin 21-010-20 lists the 2016 pairings and codes. A later Stellantis bulletin on the 850RE D clutch covers DFT-coded 2020 to 2025 Ram 1500 DT trucks and 2021 to 2024 Ram 1500 Classic trucks.
Why the EcoDiesel Rows Disagree
Ram’s 2014 spec sheet lists the 8HP45 as standard with both the 3.6L Pentastar and the 3.0L EcoDiesel. Stellantis bulletin 21-010-20 lists the 2016 EcoDiesel with the 8HP70.
The 8HP45 pairing comes from Ram’s 2014 launch spec sheet and is not confirmed by a bulletin we found. On any EcoDiesel truck, the transmission sales code on the build sheet settles the question.
Where the 2027 Ram 1500 Stands
Carscoops reports that the 2027 Ram 1500 offers seven powertrains, from the 305-hp Pentastar to the 777-hp supercharged 6.2L Hemi. Motor1 reports that most 2027 Hemi trucks drop the eTorque hybrid system.
Ram had not published 2027 transmission pairings in the sources we checked. Until it does, confirm a 2027 truck, or any year without a row here such as a 2019 or 2024 Hemi or a TRX, by its build sheet code.
Heavy-duty trucks follow a different and longer transmission history.
Ram 2500 and 3500 Transmission Chart for 2013 to 2027
The heavy-duty Hemi moved from the six-speed 66RFE in Ram’s 2016 brochure to the 8HP75-LCV eight-speed by 2020. Cummins trucks kept six-speed units through 2024, and the engine rating decided which one.
| Years | Engine and Model | Transmission | Sales Code |
|---|---|---|---|
| 2013 | 5.7L Hemi V8, 2500 and 3500 | 66RFE 6-speed | Not listed |
| 2013 | 6.7L Cummins, 2500 and 3500 | 68RFE 6-speed or G56 6-speed manual | Not listed |
| 2013 | 6.7L Cummins 385 hp, 3500 only | Aisin AS69RC 6-speed | Not listed |
| 2016 | 5.7L or 6.4L Hemi V8 | 66RFE 6-speed | Not listed |
| 2016 | 6.7L Cummins 350 hp | G56 6-speed manual | Not listed |
| 2016 | 6.7L Cummins 370 hp | 68RFE 6-speed | Not listed |
| 2016 to 2017 | 6.7L Cummins, 3500 pickup and chassis cab | Aisin AS69RC 6-speed | DF2 |
| 2019 | 6.7L Cummins or Cummins HO, 3500 | Aisin AS69RC 6-speed | DF2 |
| 2020 | 6.4L Hemi V8, 2500 and 3500 | 8HP75-LCV 8-speed | DFX |
| 2024 | 6.7L Cummins, 2500 and 3500 | 68RFE 6-speed | DG7 |
| 2025 to 2027 | 6.7L Cummins HO, 2500 and 3500 pickups | ZF TorqueFlite HD 8-speed | Not listed |
| 2027 | 6.4L Hemi V8, 2500 and 3500 | 8HP75-LCV 8-speed | Not listed |
The 2013 rows come from Chrysler’s 2013 Ram Heavy Duty spec sheet. The 2016 rows come from Ram’s 2016 Heavy Duty eBrochure, which pairs the 6.4L Hemi with the 66RFE and limits the Aisin to the 3500.
The 2025 Switch to One Diesel Transmission
Hagerty reports that the 370-hp Cummins is gone for 2025, leaving the 430-hp high-output Cummins. The Autopian reports that its ZF-built TorqueFlite HD 8-speed replaced both the Aisin AS69RC and the 68RFE in 2500 and 3500 pickups.
Ram’s 2027 Heavy Duty update keeps that pairing at 430 hp and 1,075 lb-ft. It lists the 6.4L Hemi V8 with the 8HP75-LCV 8-speed.
The G56 Manual on Cummins Trucks
Ram’s 2016 brochure lists the G56 six-speed manual with a 350-hp, 660 lb-ft rating of the 6.7L Cummins, lower than the automatic ratings. The 2013 sheet gives its first gear as 5.94 and sixth as 0.74.
The Aisin itself has a longer story, covered in our guide to the Aisin transmission in the Ram 3500.
Those sales codes are the fastest way to confirm any of these rows.
8 Ram Transmission Sales Codes From Stellantis Bulletins
Ram build records list the transmission as a three-character sales code, and Stellantis service bulletins use the same codes. Every transmission code in the bulletins below starts with the letter D.
| Sales Code | Transmission | Engine Codes in the Bulletin |
|---|---|---|
| DFD | 8HP70 8-speed | EXF or EZH |
| DFK | 8HP70 or 845RE 8-speed | EXF, EZH, ERB or ERT |
| DFL | 845RE 8-speed | ERB or ERT |
| DFT | 850RE 8-speed | ERG on 2019 DT |
| DFR | 8HP75 8-speed | EZH on 2020 DT |
| DFX | 8HP75-LCV 8-speed | ESA |
| DF2 | Aisin AS69RC 6-speed | ETK, ETL or ETM |
| DG7 | 68RFE 6-speed | ETL |
Sources: Stellantis bulletin 21-010-20 on NHTSA for DFD, DFK and DFL, and Stellantis bulletins 21-033-20 (DFT), 21-007-20 (DFR), 18-089-22 (DFX), 21-030-17 and 21-002-21 (DF2) and a 2024 Ram HD bulletin (DG7).
The DFK Exception
Bulletin 21-010-20 lists DFK under both the 8HP70 and the 845RE. On a 2016 Ram 1500, DFK alone does not tell you which eight-speed you have, so check the engine code as well.
A 3.6L Pentastar engine code points to the 845RE. A 5.7L Hemi or 3.0L EcoDiesel code points to the 8HP70.
Engine Codes That Narrow the Chart
The same bulletins list engine sales codes, which start with E. Matching the engine code first cuts most charts down to one row.
- EZH: 5.7L Hemi V8 with MDS and VVT, in 2016 and 2020 Ram 1500 bulletins.
- EXF: 3.0L EcoDiesel V6, in the 2016 Ram 1500 bulletin.
- ERB or ERT: 3.6L Pentastar V6 in 2016, and ERG for the 2019 3.6L eTorque.
- ESA: 6.4L Hemi V8 with MDS, in the 2020 Ram 2500 and 3500 bulletin.
- ETK, ETL and ETM: 6.7L Cummins variants, with ETM marked as the Cummins HO in the 2019 Ram 3500 bulletin.
When two diesel units overlap, gear ratios offer another way to tell them apart.
68RFE vs Aisin AS69RC Gear Ratios for 2013 Ram HD
The 68RFE and the Aisin AS69RC were both six-speed automatics behind the 6.7L Cummins. Chrysler’s 2013 spec sheet shows they are geared very differently in the lower gears.

| Gear | 68RFE | Aisin AS69RC | 66RFE |
|---|---|---|---|
| 1st | 3.23 | 3.75 | 3.23 |
| 2nd | 1.84 | 2.00 | 1.84 |
| 3rd | 1.41 | 1.34 | 1.41 |
| 4th | 1.00 | 1.00 | 1.00 |
| 5th | 0.82 | 0.77 | 0.82 |
| 6th | 0.63 | 0.63 | 0.63 |
| Reverse | 4.44 | 3.54 | 4.44 |
The Aisin’s 3.75 first gear is 16 percent deeper than the 68RFE’s 3.23, and its reverse is taller at 3.54 versus 4.44. A transmission shop can use those ratios to confirm a unit on the bench.
The 66RFE behind the Hemi shares every ratio with the 68RFE in the 2013 sheet. Ram pairs them with different engines, so gearing alone cannot separate those two.
Ratios help in a shop, but most owners need a faster check.
How to Identify Your Ram Transmission in 4 Steps
Most owners can confirm their transmission without crawling under the truck. Work through these checks in order and stop when one gives a clear answer.
- Find the model year and engine. The 10th VIN character encodes the model year. The engine badge or the build sheet engine code, such as EZH for the 5.7L Hemi, narrows the chart to one or two rows.
- Read the transmission sales code. A dealer build record lists a D-series code for the transmission. Match it to the sales code table above.
- Check for a clutch pedal. A third pedal on a 2013 or 2016 era Cummins truck means the G56 six-speed manual, the only manual in this chart.
- Ask for the tag reading. If records are missing, a dealer or transmission shop can read the identification tag or stamping on the transmission case.
For tag locations and pan shapes across brands, see our guide on how to tell which transmission you have.
Once you know the unit, the right fluid and service plan follow from it.
4 Ram Transmission Changes Between 2013 and 2027
Four model-year changes explain most of the chart. Each one changes which unit sits behind a given engine.

Eight Speeds for the Ram 1500
By 2014, Ram’s spec sheet listed eight-speed ZF units as standard with the V6 engines and available with the 5.7L Hemi, alongside the six-speed 65RFE.
Fluid requirements differ between these families, so match the unit before service. Our Ram 1500 transmission fluid type chart lists them by year.
Eight Speeds for the 6.4L Hemi
Stellantis bulletin 18-089-22 confirms the 8HP75-LCV behind the 2020 Ram 2500 and 3500 6.4L Hemi. The 2016 brochure still paired the same engine with the six-speed 66RFE.
One Cummins and One Diesel Transmission
For 2025, the ZF TorqueFlite HD replaced the 68RFE and the Aisin in Ram 2500 and 3500 pickups, per The Autopian. A 2024 Cummins pickup and a 2025 Cummins pickup therefore use completely different transmissions.
The Hemi Returns to the Ram 1500
Ram’s 2026 Ram 1500 release, dated December 22, 2025, brings back the 5.7L Hemi eTorque with the 8HP75. The 3.6L eTorque keeps the 850RE.
With that history mapped, the right answer for your truck comes down to two facts.
Which Ram Transmission Matches Your 2013 to 2027 Engine
Your engine narrows the answer to one or two units. On recent Ram 1500 trucks, the 3.6L uses the 850RE, while the 5.7L Hemi and the 3.0L Hurricane use the 8HP75.
On heavy-duty trucks, 2013 to 2024 Cummins automatics use the 68RFE or, mainly on the 3500 high-output engine, the Aisin AS69RC. Ram documents the G56 manual in its 2013 and 2016 lineups. From 2025, every Ram 2500 and 3500 Cummins pickup uses the ZF TorqueFlite HD.
The heavy-duty Hemi path is simpler: the 66RFE six-speed in the 2013 and 2016 documents, then the 8HP75-LCV eight-speed from the 2020 bulletin through Ram’s 2027 update.
Confirm the sales code on your build sheet before buying parts or fluid. If an 8-speed unit acts up, our 8HP75 transmission problems guide explains the common causes.
5 Ram Transmission Identification Questions Owners Ask
What Transmission Is in a 2020 Ram 1500 With the 5.7 Hemi
It is the 8HP75 eight-speed automatic, sales code DFR. Stellantis bulletins cover DFR-coded 2020 to 2023 Ram 1500 DT trucks. Earlier DS trucks with the Hemi used the 8HP70 or the 65RFE, according to Ram’s 2014 spec sheet and a 2016 Stellantis bulletin.
Does My Ram 2500 Have a 68RFE or an Aisin
A 2013 to 2024 Ram 2500 Cummins automatic uses the 68RFE. Ram’s 2013 sheet and 2016 brochure limit the Aisin to the 3500, and a 2024 bulletin lists the 68RFE on the 2500. From 2025, both models use the ZF TorqueFlite HD instead.
What Does Sales Code DG7 Mean on a Ram
DG7 is the 68RFE six-speed automatic. A Stellantis bulletin lists it on 2024 Ram 2500 and 3500 pickups. It was the standard Cummins automatic before the 2025 switch to the ZF unit, and Ram’s 2013 sheet lists it in both models.
Is the 850RE the Same as the 8HP75
No. Ram’s 2026 release lists them as two different TorqueFlite eight-speed models, and Stellantis codes them separately as DFT and DFR. The 850RE goes with the 3.6L Pentastar eTorque, while the 8HP75 goes with the 5.7L Hemi and both 3.0L Hurricane engines.
Did Ram Stop Using the Aisin Transmission
Yes. For 2025, Ram replaced the Aisin AS69RC with the ZF TorqueFlite HD eight-speed on high-output Cummins trucks. Ram’s 2027 update lists only the TorqueFlite HD behind the Cummins, rated at 430 hp and 1,075 lb-ft. Pre-2025 Aisin trucks remain common on the used market.
