Toyota Tacoma Bed Size Chart: Dimensions by Years 2026

The Toyota Tacoma comes in two bed lengths, a 5-foot short bed and a 6-foot long bed, but the exact numbers depend on which generation you own. Toyota changed bed dimensions slightly between the 2005 to 2015 truck, the 2016 to 2023 truck, and the redesigned 2024 and later model. A chart pulled from a single model year will not match your Tacoma if you own a different generation.

This guide breaks down every Toyota Tacoma bed size by generation, cab configuration, and bed length, including width, depth, and cargo volume where Toyota has published the figures. It also covers how bed length affects payload and what actually fits inside the bed. Find your generation below and use the exact numbers for accessories, cargo planning, or a side-by-side comparison before you buy.

Every Toyota Tacoma Bed Size by Generation and Length

*Third-party calculated estimate. Toyota did not publish an official cubic-foot cargo figure for this generation.

The current truck has the narrowest bed length spread and the widest wheel-well clearance of the three generations. The 2016 to 2023 truck sits almost exactly between the other two on length but is about 3 inches narrower between the wheel wells. The sections below cover each generation in detail.

4th Generation Tacoma Bed Dimensions for 2024 to 2026

The current Tacoma offers a 5-foot short bed and a 6-foot long bed. Toyota’s own dimensions page lists the short bed at 60.3 inches long and the long bed at 73.5 inches long, both with 44.7 inches of width between the wheel wells, according to Toyota’s published Tacoma dimensions page.

Bed depth on this generation depends on cab style, not bed length. Double Cab models measure 20.2 inches deep. XtraCab models measure 21.2 inches deep. Cargo volume works out to roughly 34.4 cubic feet on the short bed and about 43.3 cubic feet on the long bed.

Toyota builds the bed floor from an aluminum-reinforced Sheet-Molded Composite, a material the automaker has used on Tacoma beds since the 2005 redesign. The current version is lighter than steel and resists dents and corrosion better over time.

3rd Generation Tacoma Bed Dimensions for 2016 to 2023

Tacomas built from 2016 through 2023 use nearly the same bed lengths as the current truck, but the numbers are not identical. Toyota’s official launch materials for the redesigned 2016 Tacoma list the Double Cab short bed at 60.5 inches and the Access Cab long bed at 73.7 inches, confirmed by Toyota’s official 2016 Tacoma launch announcement.

Width between the wheel wells measures approximately 41.5 inches on this generation, about 3 inches narrower than the 2024 and later truck. Overall bed width runs close to 56.7 inches.

Bed depth and cargo volume figures vary across published sources for this generation. They generally land near 19 inches deep on the short bed and 20.5 inches on the long bed. Third-party cargo estimates put the short bed around 33.5 cubic feet and the long bed around 41 cubic feet, though Toyota never published an official cubic-foot number for this generation.

2nd Generation Tacoma Bed Dimensions for 2005 to 2015

Tacomas from 2005 through 2015 introduced the two-bed-length setup Toyota still uses today. Coverage of the 2005 redesign confirms the Double Cab launched with a choice of a 60.3 inch short bed or the same 73.5 inch long bed used standard on Regular Cab and Access Cab models, according to reporting on the 2005 Tacoma redesign.

This generation also introduced Toyota’s composite inner bed, along with adjustable tie-down cleats and a two-tier deck option. Toyota did not publish standardized width, depth, or cubic-foot cargo figures for this generation the way it does for current trucks. Owners comparing accessories for a 2005 to 2015 Tacoma should measure their own bed or check the fitment chart on the part itself rather than relying on a single blanket number.

How Bed Length Changes Tacoma Payload Capacity

Bed length changes more than cargo space. It also shifts how much weight the Tacoma can legally carry. On the current generation, the 5-foot bed reaches up to 1,705 pounds of payload on gas i-FORCE Double Cab models. The 6-foot bed tops out closer to 1,680 pounds on the same trim range.

The gap comes from cab and drivetrain weight, not the bed itself. A shorter bed usually pairs with a lighter overall truck, which leaves more of the Gross Vehicle Weight Rating available for cargo. Check the tire and loading sticker inside your driver door jamb for your exact truck’s payload rating, since options and packages change the number.

What Actually Fits in a Tacoma Bed by Length

A 4×8 sheet of plywood will not lie flat between the wheel wells on any Tacoma generation, since the width between the wells maxes out at 44.7 inches. You can still carry full sheets by resting them on top of the wheel wells or loading them at an angle with the tailgate down.

Standard ATVs fit in the 6-foot long bed with room to spare. Most standard motorcycles fit as well, though the wheel wells narrow the usable floor width, so measure your specific machine before loading it.

Two mountain bikes fit side by side in either bed length with the front wheels removed or fork mounts installed. Anyone building a sleeping platform or storage system should measure at the wheel-well floor level, not the bed rail, since the floor narrows more than the rail suggests.

Choosing the Right Bed Cover or Liner for Your Tacoma

Bed covers, liners, and tonneau systems are sized to exact bed length, not generation, so a 6-foot bed cover fits any 6-foot Tacoma bed regardless of model year. The bigger factor is the bed rail and deck-rail mounting system, which changed enough between generations that some clamp-style covers do not cross over cleanly.

If you are shopping for a cover, our best bed cover for your Tacoma guide breaks down options by bed length and mounting style. For anyone using the bed for camping or overlanding, our truck bed tent picks for the Tacoma guide covers fitment for both the 5-foot and 6-foot beds.

Picking the Right Tacoma Bed Length for Your Needs

Bed length comes down to two real numbers, not just a badge. The 5-foot bed keeps the truck shorter and easier to park, while the 6-foot bed adds roughly 9 cubic feet of cargo room and handles longer loads without a tailgate extender.

If your Tacoma was built between 2005 and 2015 or between 2016 and 2023, use the generation-specific numbers above rather than current-model figures. A few inches of difference can throw off accessory fitment. Once you know your exact bed length and generation, the figures in this Toyota Tacoma bed size chart are the ones to hand to any accessory maker’s fit guide. Browse our Toyota Tacoma accessories guide next for gear that matches your bed.

Common Questions About Tacoma Bed Sizes

What is the bed size of a Toyota Tacoma?

The Tacoma comes in a 5-foot short bed or a 6-foot long bed, though exact inches shift slightly by generation. On the current 2024 to 2026 truck, that is 60.3 inches and 73.5 inches. Check the chart above for your exact model year.

Is the Tacoma bed big enough for a 4×8 sheet of plywood?

Not flat. The 44.7 inch width between the wheel wells is narrower than a 48 inch sheet. Most owners rest the sheet on top of the wheel wells or angle it with the tailgate down.

Did the Tacoma bed size change for 2024?

Yes, slightly. The short bed shrank from 60.5 to 60.3 inches and the long bed shrank from 73.7 to 73.5 inches compared to the 2016 to 2023 truck. Wheel-well width grew to 44.7 inches.

What is the difference between the Tacoma 5-foot and 6-foot bed?

The 6-foot bed is roughly 13 inches longer and adds about 9 cubic feet of cargo volume on current models. The 5-foot bed is lighter and typically pairs with a higher payload rating.

How much can you haul in a Toyota Tacoma bed?

Payload on current gas models reaches up to 1,705 pounds on the 5-foot bed, though the exact number depends on trim and options. Check your driver door jamb sticker for your specific truck’s rating.