Ford F-250 Oil Life Reset Steps by Year for Gas and Diesel Trucks
On a 2026 Ford F-250, you reset the oil life by pressing Menu on the steering wheel, choosing Vehicle Maintenance, then Oil Life, and holding OK until the reset confirmation appears.
Older trucks use different buttons. A 2010 F-250 resets through the SETUP and RESET buttons in the message center, and a 2017 truck uses the Oil Life Reset item in the cluster settings menu, held with OK.
This Ford F250 oil life reset guide gives the exact steps from Ford’s owner manuals for each display type, explains what the warnings mean, and covers trucks that never had a monitor.
Ford F-250 Oil Life Reset Steps From 5 Ford Manual Entries
Match your truck to the display it has, then follow that set of steps. Each row comes from the Ford owner’s manual for the year shown, and we verified those years only.
| Manual checked | Display | Reset path | Final action |
|---|---|---|---|
| 2010 owner guide | Standard message center | Press the setup button to show OIL LIFE XXX% HOLD RESET = NEW | Hold the SELECT/RESET stem for 2 seconds |
| 2010 owner guide | Optional message center | Press SETUP to show OIL LIFE XXX% HOLD RESET = NEW | Hold RESET for 2 seconds |
| 2015 owner manual | Message center or settings menu | SETUP button, or the Oil Life Reset item in the settings menu | Hold RESET for 2 seconds, or hold OK |
| 2017 owner manual | Information display | Settings, Convenience or Vehicle, Oil Life Reset | Hold OK until Reset Successful |
| 2026 owner manual | Instrument cluster display | Menu, Vehicle Maintenance, Oil Life | Hold OK until confirmation appears |
The reset only tells the monitor that fresh oil is in the engine. Do it right after the oil and filter change, not before.
2026 F-250 Oil Life Reset in 4 Steps
Source: Ford 2026 Super Duty owner’s manual, page 455.
- 1
Press the Menu button on the steering wheel.
- 2
Select Vehicle Maintenance.
- 3
Select Oil Life.
- 4
Press and hold OK until the reset confirmation appears.
The newest trucks have the shortest path, so they come first.
How to Reset Oil Life on a 2026 F-250
Ford’s 2026 Super Duty owner’s manual, edition 202506, lists four steps under “Resetting the Intelligent Oil Life Monitor” on page 455. The manual covers the 6.8L and 7.3L gas V8s and the 6.7L Power Stroke diesel.
- Press the Menu button on the steering wheel to enter the instrument cluster display main menu.
- Select Vehicle Maintenance.
- Select Oil Life.
- Press and hold the OK button until the system reset confirmation appears.

The graphic shows the four presses in order. Keep holding OK in step 4 until the confirmation appears, because a short press only selects the item.
When the 2026 Monitor Asks for Oil
The 2026 manual says to change the oil within two weeks or 500 miles of the oil change message appearing. Your dealer can advise whether a full service is also due.
Diesel owners can check the right oil and fill amount in our 6.7L Power Stroke oil type and capacity guide before the next change.
Maximum Interval if the Monitor Fails
If the display resets early or stops working, the 2026 manual sets hard limits. Never exceed one year or 15,000 miles between oil changes on a diesel, or 10,000 miles on a gas engine.
The 2017 truck uses a similar display with a different menu name.
How to Reset Oil Life on a 2017 F-250
Ford’s 2017 Super Duty owner’s manual gives a full Oil Change Indicator Reset procedure on pages 331 and 332.
- Use the steering wheel arrow buttons to scroll to Settings.
- Press the right arrow button, then scroll to Convenience.
- Press the right arrow button, then scroll to Oil Life Reset.
- Press the right arrow button to reach Hold OK to Reset.
- Press and hold OK until the cluster shows Reset Successful and the remaining life reads 100%.
If the cluster shows Not Reset or Reset Cancelled, the manual says to repeat the process. Ford’s settings chart on page 113 of the same manual lists Oil Life Reset under Vehicle instead of Convenience, so check both submenus if the first one does not show it.
2017 Oil Messages
The 2017 manual shows Change Engine Oil Soon when 10% or less oil life remains, and Oil Change Required at 0%. For diesel engines, it tells owners to reset the Intelligent Oil Life Monitor after the oil change.

The card shows how the early warning moved from 5% in the 2010 guide to 10% in the 2017 manual, with 0% meaning Oil Change Required in both.
Gas Trucks Follow a Fixed Schedule
The 2017 manual describes the Intelligent Oil Life Monitor for diesel engines. Its normal schedule for gas engines calls for an oil and filter change every 7,500 miles or six months, whichever comes first.
We checked the 2017 manual only. Later trucks in this generation may word the menu differently, so read the screen as you go.
Trucks from the previous generation still use physical SETUP and RESET buttons.
How to Reset Oil Life on a 2015 F-250
Ford’s 2015 Super Duty owner’s manual lists two ways, depending on which display the truck has.
Message Center With SETUP and RESET Buttons
- Press and release the SETUP button to display OIL LIFE XXX% HOLD RESET = NEW.
- Press and hold the RESET button for two seconds, then release to reset the oil life to 100%.
- To set a lower start value, wait for OIL LIFE SET TO XXX%, then release and press RESET. Each press lowers the value by 10%.
Settings Menu Display
On trucks with the larger display, the 2015 manual lists Oil Life Reset in the vehicle settings with the prompt “Set to XXX% (Hold OK to Reset).” Scroll to that item and hold OK.
The 2015 manual lists Engine Oil Change Soon as the warning when oil life is nearing its end, and Oil Change Required when it reaches 0%. Its normal schedule for the 6.2L and 6.8L gas engines lists an oil and filter change every 7,500 miles or six months, whichever comes first.
The 2010 trucks introduced most of this logic.
How to Reset Oil Life on a 2010 F-250
Ford’s 2010 F-250 owner guide describes a standard message center and an optional one. Both reset the monitor to a 100% start value of 7,500 miles or 12 months.
Standard Message Center
- Press and release the setup button to display OIL LIFE XXX% HOLD RESET = NEW.
- Press and hold the SELECT/RESET stem for two seconds and release to reset the oil life to 100%.
Optional Message Center
- Press and release the SETUP button to display OIL LIFE XXX% HOLD RESET = NEW.
- Press and hold the RESET button for two seconds and release to reset the oil life to 100%.
Gas and Diesel Differences in 2010
The 2010 guide marks both oil messages “Gas engine only” under the standard and optional message centers. Engine Oil Change Soon appears at 5% oil life, and Oil Change Required appears at 0%.
For the 6.4L Power Stroke, the 2010 guide refers owners to the separate Power Stroke diesel supplement. We did not check the 2008 and 2009 guides, so confirm those years in the glovebox manual.
Trucks built before this generation work differently again.
Why 2002 to 2007 F-250 Guides Show No Oil Life Reset
We searched Ford’s 2002, 2005 and 2007 F-250 owner guides and found no oil life monitor or reset procedure. These trucks follow the maintenance schedule in the owner guide instead. We could not open a 1999 guide, so treat earlier trucks the same way only after checking yours.
That means there is nothing to reset after an oil change. A sticker on the windshield or a note in a service log does the job the monitor does on newer trucks.
Diesel owners from 2003 to 2007 can find the engine’s details in our 6.0L Power Stroke specs guide.
3 Checks Before Any F-250 Oil Life Reset
The reset is the last step of an oil change, not the first. Ford’s manuals list a few checks that make sure the monitor starts from a true 100%.
Fill With the Right Oil
The 2017 manual tells owners to refill the engine with new oil using the capacities and specifications section. The 2026 manual adds a warning against supplemental engine oil additives, which it calls unnecessary and possibly harmful to the engine.
Work on a Cool Engine
The 2026 manual warns against removing the filler cap with the engine running and against adding oil when the engine is hot. Clean the area around the filler cap before you remove it, as the 2017 manual advises.
Check the Level First
Check the dipstick after the fill and before the reset. Then complete the reset so the monitor and the fresh oil start together.
How to Change the Oil Life Start Value in 3 Steps
The 2010 message centers and, where equipped with the feature, the 2015 message center let you set the monitor below 100%. In our view that helps owners who tow or idle often and want earlier reminders.
- Display OIL LIFE XXX% HOLD RESET = NEW with the SETUP button.
- Hold RESET until OIL LIFE SET TO XXX% appears.
- Release and press RESET again. Each press lowers the start value by 10%.
The 2010 guide gives an example. A 60% start value sets the reminder to 4,500 miles and 219 days instead of 7,500 miles and 12 months.
The 2017 manual’s reset procedure goes straight to 100% and does not describe a lower start value.
4 Reasons an F-250 Oil Life Reset Will Not Stick
Ignition Not On
If the cluster display is dark, the menus cannot be reached. Switch the ignition on before you start the reset.
Button Released Too Early
The 2010 and 2015 manuals call for a two-second hold. The 2017 manual says to hold OK until Reset Successful appears, and the 2026 manual says to hold until the confirmation appears.
Wrong Menu Item
Ford’s 2017 manual notes that the trip and fuel economy screens also reset when you press and hold OK. Make sure the screen shows Oil Life before you hold the button.
Different Display Than Expected
Trucks in the same year can have different clusters. If the menu names in this guide do not match your screen, follow the glovebox manual for your exact truck.
After a correct reset, the monitor counts down from 100% again. The interval it chooses depends on how the truck is used.
How the 2017 Diesel Schedule Sets 3 Oil Change Tiers
Ford’s 2026 manual says that under certain conditions the Intelligent Oil Life Monitor may call for an oil change before the general service is due. The 2017 manual shows how that works on the 6.7L diesel with a three-tier table.
- Normal: about 7,500 to 10,000 miles between oil changes.
- Severe: about 5,000 to 7,499 miles, with conditions such as extended idling and extended hot or cold operation.
- Extreme: about 3,000 to 4,999 miles, with conditions such as maximum load or towing.
The same diesel table notes that each hour of idling equals about 25 miles of driving. A work truck that idles all day can need oil much sooner than its odometer suggests.
For towing-heavy owners, our Ford Super Duty towing capacity guide covers the loads that push the monitor down fastest.
Completing a Ford F250 Oil Life Reset the Right Way
Change the oil and filter first, then reset. On the 2026 truck the path is Menu, Vehicle Maintenance, Oil Life, hold OK. On the 2017 truck it is Settings, Oil Life Reset, then hold OK until Reset Successful.
On 2010 and 2015 trucks, use SETUP and hold RESET for two seconds. The 2002 to 2007 guides show no monitor, so those trucks follow the printed schedule.
Whichever truck you own, finish every Ford F250 oil life reset by checking the display reads 100% before you drive away.
F-250 Oil Life Reset FAQ in 6 Answers
How Do I Reset the Oil Light on a 2024 F-250?
Press the steering wheel Menu button, select Vehicle Maintenance, then Oil Life, and hold OK until the confirmation appears. That is the procedure in Ford’s 2026 Super Duty manual. A 2024 truck is in the same generation, but check your own manual if a step differs.
How Do I Reset Oil Life on a 2018 F-250?
Go to Settings, then Convenience or Vehicle, then Oil Life Reset, and hold OK until Reset Successful appears. That is the path in Ford’s 2017 Super Duty manual, and 2018 trucks belong to the same generation. Check your own manual if the menu names differ.
Does the Diesel F-250 Have an Oil Life Monitor?
Yes, on the trucks we checked from 2017 on. Ford’s 2017 manual describes an Intelligent Oil Life Monitor for diesel engines and says to reset it after every oil change. The 2010 guide sends 6.4L diesel owners to a separate supplement.
What Does Change Engine Oil Soon Mean?
It means the remaining oil life is low. Ford’s 2017 manual shows it at 10% or less, and the 2010 guide at 5% or less. Plan an oil and filter change soon, then reset the monitor afterward so the next countdown starts from 100%.
Can I Reset Oil Life Without Changing the Oil?
You can, but you should not. The reset tells the monitor the oil is new, so resetting early hides the next warning and can push the next change past the oil’s real limit. Ford’s 2026 manual says to reset the monitor after each oil change.
Is the F-250 Reset the Same as the F-150?
The idea is the same, but the menus differ by year and display, and the F-150 has its own owner’s manuals. Our F-150 oil life reset guide covers the half-ton steps separately, so use the F-250 steps on a Super Duty.
